Mechanical properties	Test Method	Test Result
Tensile modulus	ASTM D638	2650 Mpa
tensile strength	ASTM D638	59.0 Mpa
elongation	ASTM D638	> 15 %
Flexural modulus	ASTM D790	2850 Mpa
bending strength	ASTM D790	96.0 Mpa

injection	Test Condition	Test Method	Test Result
drying temperature			80 to 90 °C
drying time			3.0 to 4.0 hr
Temperature at the rear of the barrel			180 to 200 °C
Temperature in the middle of the barrel			190 to 210 °C
Temperature at the front of the material cylinder			200 to 220 °C
Spray nozzle temperature			200 to 230 °C
Processing (melt) temperature			200 to 230 °C
Temperature			40 to 60 °C
Back pressure			2.94 to 5.88 Mpa
screw speed			30 to 60 rpm

Thermal performance	Test Method	Test Result
Heat distortion temperature	ASTM D648	84.0 °C
vicat	ASTM D15257	92.0 °C
RTI Elec	UL 746	50.0 °C
RTI Imp	UL 746	50.0 °C
RTI	UL 746	50.0 °C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top