plas

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
ABS XG569C LG CHEM KOREA
--
Electrical enclosure,Electronic field,Electrical field
High gloss,scratch resistance
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

hardnessTest ConditionTest MethodLG CHEM KOREA/XG569C
Rockwell hardnessR-Scale, 23°C, InjectionASTM D785118
thermal performanceTest ConditionTest MethodLG CHEM KOREA/XG569C
Hot deformation temperature1.8 MPa, Unannealed, 6.40 mm, InjectionASTM D64884.0 °C
RTIUL 74650.0 °C
RTI ElecUL 74650.0 °C
RTI ImpUL 74650.0 °C
Vicat softening temperatureASTM D1525792.0 °C
mechanical propertiesTest ConditionTest MethodLG CHEM KOREA/XG569C
Bending modulus23°C, 3.20 mm, InjectionASTM D7902850 Mpa
bending strength23°C, 3.20 mm, InjectionASTM D79096.0 Mpa
elongationBreak, 23°C, 3.20 mm, InjectionASTM D638> 15 %
Tensile modulus23°C, 3.20 mm, InjectionASTM D6382650 Mpa
tensile strengthYield, 23°C, 3.20 mm, InjectionASTM D63859.0 Mpa
Physical propertiesTest ConditionTest MethodLG CHEM KOREA/XG569C
melt mass-flow rate220°C/10.0 kgASTM D123811 g/10 min
Shrinkage rate23°C, 3.20 mm, Injection,FlowASTM D9550.40 - 0.70 %
flammabilityTest ConditionTest MethodLG CHEM KOREA/XG569C
UL flame retardant rating3.0 mmUL 94HB
1.5 mmUL 94HB
injectionTest ConditionTest MethodLG CHEM KOREA/XG569C
Back pressure2.94 to 5.88 Mpa
drying temperature80 to 90 °C
drying time3.0 to 4.0 hr
Mold temperature40 to 60 °C
Processing (melt) temperature200 to 230 °C
Screw speed30 to 60 rpm
Spray nozzle temperature200 to 230 °C
Temperature at the front of the material cylinder200 to 220 °C
Temperature at the rear of the barrel180 to 200 °C
Temperature in the middle of the barrel190 to 210 °C