Material Properties:Antichemical｜Hydrolysis resistance｜Lubricity｜Glass fiber reinforced｜Dimensional stability｜Creep resistance｜Oil resistant｜High mobility｜high strength｜High rigidity｜High impact resistance｜Rigidity at high temperatures｜tensile strength ｜Heat resistance
Application Areas:Automotive sector｜Fitness equipment｜Lawn garden equipment｜Especially under high temperature conditions｜Designed to achieve greater structural strength｜Rigidity and hydrolysis resistance
Color:--
Grade:Enhanced level

Material Certification

Technical Data Sheet Compare

physical property	Test Condition	Test Method	Test Result
density		ISO 1183	1.5 g/cm³
Shrinkage rate		ISO 294-4	0.4 %
Shrinkage rate	Shrinkage rate		ISO 294-4	1.0 %
Water absorption rate		ISO 62	0.6 %
Water absorption rate	Water absorption rate		ISO 62	1.5 %

Mechanical properties	Test Condition	Test Method	Test Result
Impact strength of simply supported beam without notch		ISO 179	16.5 kJ/m²
Impact strength of simply supported beam without notch	Impact strength of simply supported beam without notch		ISO 179	15.1 kJ/m²
tensile strength		ISO 527	225 Mpa
elongation		ISO 527	3 %
Tensile modulus		ISO 527	14800 Mpa
Flexural modulus		ISO 178	12500 Mpa
bending strength		ISO 178	340 Mpa

Electrical performance	Test Condition	Test Method	Test Result
dielectric strength		IEC 60243	17 KV/mm
Volume resistivity		IEC 60093	3 ohm-cm×1015

Thermal performance	Test Condition	Test Method	Test Result
melting temperature		ISO 3146	260 °C
Heat distortion temperature		ISO 75	250 °C
Heat distortion temperature	Heat distortion temperature		ISO 75	258 °C
UL flame retardant rating		UL 94	HB

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top