Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PA66 R543H ASCEND USA
Vydyne®
Automotive sector,Fitness equipment,Lawn garden equipment,Especially under high temperature conditions,Designed to achieve greater structural strength,Rigidity and hydrolysis resistance
Antichemical,Hydrolysis resistance,Lubricity,Glass fiber reinforced,Dimensional stability,Creep resistance,Oil resistant,High mobility,high strength,High rigidity,High impact resistance,Rigidity at high temperat,tensile strength ,Heat resistance
UL
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
thermal performance | Test Condition | Test Method | ASCEND USA/R543H |
---|---|---|---|
Hot deformation temperature | 0.45MPa | ISO 75 | 258 °C |
1.82MPa | ISO 75 | 250 °C | |
Melting temperature | ISO 3146 | 260 °C | |
UL flame retardant rating | UL 94 | HB |
mechanical properties | Test Condition | Test Method | ASCEND USA/R543H |
---|---|---|---|
Bending modulus | ISO 178 | 12500 Mpa | |
bending strength | ISO 178 | 340 Mpa | |
elongation | Break | ISO 527 | 3 % |
Impact strength of simply supported beam without notch | 23℃ | ISO 179 | 16.5 kJ/m² |
-30℃ | ISO 179 | 15.1 kJ/m² | |
Tensile modulus | ISO 527 | 14800 Mpa | |
tensile strength | Break | ISO 527 | 225 Mpa |
Electrical performance | Test Condition | Test Method | ASCEND USA/R543H |
---|---|---|---|
Dielectric strength | IEC 60243 | 17 KV/mm | |
Volume resistivity | IEC 60093 | 3 ohm-cm×1015 |
Physical properties | Test Condition | Test Method | ASCEND USA/R543H |
---|---|---|---|
density | ISO 1183 | 1.5 g/cm³ | |
Shrinkage rate | 2mm,平行 | ISO 294-4 | 0.4 % |
2mm,垂直 | ISO 294-4 | 1.0 % | |
Water absorption rate | 23℃,24hrs | ISO 62 | 0.6 % |
23℃,50%湿度 | ISO 62 | 1.5 % |