PEEK

PEEK AVASPIRE® AV-750 SOLVAY USA

342

Unit Price:US$ 90,229 /MT
Packaging Specification:
25 KG/PKG
Packaging Material:
Paper bag
Supply Quantity:
19MT
Delivery Terms:
FOB
Port of Loading :
China Main Port
Accepted Payment Methods:
T/T
Shipping:
Negotiate supplier for shipping details

Supplier Information

ASIA PLASTIC EXCHANGE LIMITED

+86 755 ********View

serv********View

+86 ********View

For more details, please contact the supplier!

Material Description

Material Properties:--
Application Areas:--
Color:--
Grade:Injection grade

Technical Data Sheet

Filling analysis	Test Condition	Test Method	Test Result
Melt viscosity	400°C, 1000 sec^-1	ASTM D3835	450 Pa·s

impact performance	Test Condition	Test Method	Test Result
Suspended wall beam without notch impact strength	--	ISO 180	41 kJ/m²
Suspended wall beam without notch impact strength	Suspended wall beam without notch impact strength	--	ASTM D4812	590 J/m

flammability	Test Condition	Test Method	Test Result
UL flame retardant rating	0.8 mm	UL 94	V-1
UL flame retardant rating	UL flame retardant rating	1.6 mm	UL 94	V-0

mechanical properties	Test Condition	Test Method	Test Result
shear strength		ASTM D732	89.0 Mpa
compressive strength		ASTM D695	182 Mpa
bending strength	--	ISO 178	250 Mpa
	bending strength	250°C	ASTM D790	54.0 Mpa
	bending strength	bending strength	23°C	ASTM D790	253 Mpa
Bending modulus	--	ISO 178	15400 Mpa
Bending modulus	Bending modulus	--	ASTM D790	14800 Mpa
elongation	Break	ISO 527-2/1A/5	1.8 %
elongation	elongation	Break5	ASTM D638	1.8 %
tensile strength	--6	ASTM D638	191 Mpa
tensile strength	tensile strength	Yield, 5.00 mm	ISO 527-2/1A/5	188 Mpa
Tensile modulus	--	ISO 527-2/1A/1	16700 Mpa
Tensile modulus	Tensile modulus	--5	ASTM D638	15100 Mpa

injection	Test Condition	Test Method	Test Result
drying temperature			150 to 175 °C
drying time			2.5 to 4.0 hr
Processing (melt) temperature			370 to 395 °C
Mold temperature			175 to 210 °C
Back pressure			0.138 to 0.345 Mpa
Screw speed			75 rpm
Screw compression ratio			2.0:1.0

thermal performance	Test Condition	Test Method	Test Result
specific heat	50°C	DSC	1260 J/kg/°C
specific heat	specific heat	200°C	DSC	1620 J/kg/°C
thermal conductivity		ASTM E1530	0.31 W/m/K
Linear coefficient of thermal expansion	-50 to 50°C，Flow	ASTM E831	1.5E-5 cm/cm/°C
Melting temperature		ASTM D3418	345 °C
Glass transition temperature		ASTM D3418	150 °C
Hot deformation temperature	1.8 MPa, Annealed	ASTM D648	285 °C

Physical properties	Test Condition	Test Method	Test Result
Water absorption rate	24 hr	ASTM D570	0.10 %
Shrinkage rate	Across FlowFlow : 3.18 mm	ASTM D955	1.2 - 1.4 %
Shrinkage rate	Shrinkage rate	Flow : 3.18 mm	ASTM D955	0.10 - 0.30 %
melt mass-flow rate	380°C/2.16 kg	ASTM D1238	7.0 g/10 min

Electrical performance	Test Condition	Test Method	Test Result
Surface resistivity		ASTM D257	> 1.9E+17 ohms
Volume resistivity		ASTM D257	1.8E+17 ohms·cm
Dielectric strength		ASTM D149	19 KV/mm
Dielectric constant	60 Hz	ASTM D150	3.68
	Dielectric constant	1 kHz	ASTM D150	3.69
	Dielectric constant	Dielectric constant	1 MHz	ASTM D150	3.66
Dissipation factor	60 Hz	ASTM D150	2.0E-3
	Dissipation factor	1 kHz	ASTM D150	1.0E-3
	Dissipation factor	Dissipation factor	1 MHz	ASTM D150	3.0E-3

hardness	Test Condition	Test Method	Test Result
Rockwell hardness	M-Scale	ASTM D785	105

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top

PEEK AVASPIRE® AV-750 SOLVAY USA

Material Description

Technical Data Sheet Compare

Technical Data Sheet