Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PEEK AV-750 SOLVAY USA
AVASPIRE®
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | SOLVAY USA/AV-750 |
|---|---|---|---|
| -- | ISO 180 | 41 kJ/m² | |
| -- | ASTM D4812 | 590 J/m |
| hardness | Test Condition | Test Method | SOLVAY USA/AV-750 |
|---|---|---|---|
| Rockwell hardness | M 级 | ASTM D785 | 105 |
| Mechanical properties | Test Condition | Test Method | SOLVAY USA/AV-750 |
|---|---|---|---|
| Tensile stress | 屈服, 5.00 mm | ISO 527-2/1A/5 | 188 Mpa |
| Tensile modulus | -- | ISO 527-2/1A/1 | 16700 Mpa |
| bending strength | 23°C | ASTM D790 | 253 Mpa |
| Flexural modulus | -- | ISO 178 | 15400 Mpa |
| elongation | 断裂 | ISO 527-2/1A/5 | 1.8 % |
| bending strength | -- | ISO 178 | 250 Mpa |
| Tensile modulus | -- 5 | ASTM D638 | 15100 Mpa |
| bending strength | 250°C | ASTM D790 | 54.0 Mpa |
| shear strength | ASTM D732 | 89.0 Mpa | |
| Flexural modulus | -- | ASTM D790 | 14800 Mpa |
| elongation | 断裂 5 | ASTM D638 | 1.8 % |
| compressive strength | ASTM D695 | 182 Mpa | |
| Tensile stress | -- 6 | ASTM D638 | 191 Mpa |
| Electrical performance | Test Condition | Test Method | SOLVAY USA/AV-750 |
|---|---|---|---|
| Dissipation Factor | 1 kHz | ASTM D150 | 1.0E-3 |
| Volume resistivity | ASTM D257 | 1.8E+17 ohms·cm | |
| Surface Resistivity | ASTM D257 | > 1.9E+17 ohms | |
| dielectric constant | 60 Hz | ASTM D150 | 3.68 |
| Dissipation Factor | 60 Hz | ASTM D150 | 2.0E-3 |
| dielectric constant | 1 MHz | ASTM D150 | 3.66 |
| dielectric strength | ASTM D149 | 19 KV/mm | |
| dielectric constant | 1 kHz | ASTM D150 | 3.69 |
| Dissipation Factor | 1 MHz | ASTM D150 | 3.0E-3 |
| flammability | Test Condition | Test Method | SOLVAY USA/AV-750 |
|---|---|---|---|
| UL flame retardant rating | 0.8 mm | UL 94 | V-1 |
| 1.6 mm | UL 94 | V-0 |
| Filling analysis | Test Condition | Test Method | SOLVAY USA/AV-750 |
|---|---|---|---|
| melt viscosity | 400°C, 1000 sec^-1 | ASTM D3835 | 450 Pa·s |
| physical property | Test Condition | Test Method | SOLVAY USA/AV-750 |
|---|---|---|---|
| Water absorption rate | 24 hr | ASTM D570 | 0.10 % |
| melt mass-flow rate | 380°C/2.16 kg | ASTM D1238 | 7.0 g/10 min |
| Shrinkage rate 4 | 横向流动 : 3.18 mm | ASTM D955 | 1.2 到 1.4 % |
| 流动 : 3.18 mm | ASTM D955 | 0.10 到 0.30 % |
| Thermal performance | Test Condition | Test Method | SOLVAY USA/AV-750 |
|---|---|---|---|
| specific heat | 50°C | DSC | 1260 J/kg/°C |
| 200°C | DSC | 1620 J/kg/°C | |
| -50 到 50°C | ASTM E831 | 1.5E-5 cm/cm/°C | |
| thermal conductivity | ASTM E1530 | 0.31 W/m/K | |
| Glass Transition Temperature | ASTM D3418 | 150 °C | |
| Thermal deformation temperature under load | 1.8 MPa, 退火 | ASTM D648 | 285 °C |
| ASTM D3418 | 345 °C |
| injection | Test Condition | Test Method | SOLVAY USA/AV-750 |
|---|---|---|---|
| Temperature | 175 到 210 °C | ||
| screw speed | 75 rpm | ||
| Processing (melt) temperature | 370 到 395 °C | ||
| Back pressure | 0.138 到 0.345 Mpa | ||
| Screw compression ratio | 2.0:1.0 | ||
| drying temperature | 150 到 175 °C | ||
| drying time | 2.5 到 4.0 hr |
Contact Us
Get App
Top