Technical Data Sheet Compare

physical property	Test Condition	Test Method	Test Result
melt mass-flow rate		ASTM D1238	27 g/10min
Shrinkage rate		ASTM D955	0.02 in/in

Mechanical properties	Test Method	Test Result
elongation at break	ASTM D638/ISO 527	50 %
tensile strength	ASTM D638/ISO 527	90.4 kg/cm²(MPa)[Lb/in²]
Rockwell hardness	ASTM D785	80
Flexural modulus	ASTM D790/ISO 178	379.999 kg/cm²(MPa)[Lb/in²]
bending strength	ASTM D790/ISO 178	13.2 kg/cm²(MPa)[Lb/in²]
elongation	ASTM D638	50 %
Flexural modulus	ASTM D790	378 psi
bending strength	ASTM D790	13.2 psi
Impact strength of cantilever beam gap	ASTM D256	1.01 ft.ib/in
Rockwell hardness	ASTM D785	80
tensile strength	ASTM D638	9.04 psi

Electrical performance	Test Method	Test Result
Surface Resistivity	ASTM D257/IEC 60093	1.00E+16 Ω
Volume resistivity	ASTM D257/IEC 60093	1.00E+14 Ω.cm
Surface Resistivity	ASTM D257	1E+16 Ohm
Volume resistivity	ASTM D257	1E+14 ohm.cm
dielectric strength	ASTM D149	483 v/mil
dielectric constant	ASTM D150	3.7
Dissipation Factor	ASTM D150	0.007

Physical properties	Test Method	Test Result
density	ASTM D792/ISO 1183	1.14
Shrinkage rate	ASTM D955	0.02 %
melt mass-flow rate	ASTM D1238/ISO 1133	27 g/10min

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top