Technical Data Sheet Compare

thermal performance	Test Condition	Test Method	Test Result
Linear coefficient of thermal expansion	---	ASTM E-831	6.8×10 1/℃
Heat Deflection Temperature	1.82MPa	ASTM D-648	132 °C
vicat	---	ASTM D-1525	154 °C
Heat Deflection Temperature	0.45MPa	ASTM D-648	137 °C

Basic performance	Test Condition	Test Method	Test Result
melt mass-flow rate	---	ASTM D-1238	10.5 g/10min
Water absorption rate	---	ASTM D-570	0.15 %

Electrical performance	Test Condition	Test Method	Test Result
dielectric constant	60Hz	ASTM D-150	3.17 ---
dielectric constant	dielectric constant	1MHz	ASTM D-150	2.96 ---
Dissipation Factor	1MHz	ASTM D-150	0.01 ---
Dissipation Factor	Dissipation Factor	60Hz	ASTM D-150	0.0009 ---
volume resistivity	---	ASTM D-257	1.0×10 Ω.cm

Physical properties	Test Condition	Test Method	Test Result
shrinkage rate	3.2mm	ASTM D-955	5-7 10
density	---	ASTM D-792	1.2 ---

mechanical properties	Test Condition	Test Method	Test Result
Elongation at break	断裂点	ASTM D-638	130 %
Impact strength of cantilever beam gap	缺口23°C	ASTM D-256	800 J/m
flexural modulus	---	ASTM D-790	2343 Mpa
Rockwell hardness	R	ASTM D-785	118 ---
tensile strength	屈服点，---	ASTM D-638	62 Mpa
tensile strength	tensile strength	断裂点，---	ASTM D-638	69 Mpa
bending strength	---	ASTM D-790	96 Mpa

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top