Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PC 141R-701 SABIC INNOVATIVE US
LEXAN™
--
transparent,Flame retardant, UL 94HB,For general injection mol,Low viscosity bottom
UL
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Basic Performance | Test Condition | Test Method | SABIC INNOVATIVE US/141R-701 |
|---|---|---|---|
| melt mass-flow rate | --- | ASTM D-1238 | 10.5 g/10min |
| Water absorption rate | --- | ASTM D-570 | 0.15 % |
| thermal performance | Test Condition | Test Method | SABIC INNOVATIVE US/141R-701 |
|---|---|---|---|
| Hot deformation temperature | 1.82MPa | ASTM D-648 | 132 °C |
| 0.45MPa | ASTM D-648 | 137 °C | |
| Linear coefficient of thermal expansion | --- | ASTM E-831 | 6.8×10 1/℃ |
| Vicat softening temperature | --- | ASTM D-1525 | 154 °C |
| mechanical properties | Test Condition | Test Method | SABIC INNOVATIVE US/141R-701 |
|---|---|---|---|
| Bending modulus | --- | ASTM D-790 | 2343 Mpa |
| bending strength | --- | ASTM D-790 | 96 Mpa |
| Elongation at Break | Break点 | ASTM D-638 | 130 % |
| Impact strength of cantilever beam gap | Notched23°C | ASTM D-256 | 800 J/m |
| Rockwell hardness | R | ASTM D-785 | 118 --- |
| tensile strength | Break点,--- | ASTM D-638 | 69 Mpa |
| Yield点,--- | ASTM D-638 | 62 Mpa |
| Electrical performance | Test Condition | Test Method | SABIC INNOVATIVE US/141R-701 |
|---|---|---|---|
| Dielectric constant | 1MHz | ASTM D-150 | 2.96 --- |
| 60Hz | ASTM D-150 | 3.17 --- | |
| Dissipation factor | 60Hz | ASTM D-150 | 0.0009 --- |
| 1MHz | ASTM D-150 | 0.01 --- | |
| Volume resistivity | --- | ASTM D-257 | 1.0×10 Ω.cm |
| Physical properties | Test Condition | Test Method | SABIC INNOVATIVE US/141R-701 |
|---|---|---|---|
| density | --- | ASTM D-792 | 1.2 --- |
| Shrinkage rate | 3.2mm | ASTM D-955 | 5-7 10 |