Material Properties:Low warpage|Flame retardant|Processability|Glass fiber reinforced|Filler: Long glass fiber
Application Areas:Household appliances|Household appliances|Spool|Laptop case
Color:--
Grade:Injection grade
Material Certification
UL
Technical Data Sheet
impact performance
Test Condition
Test Method
Test Result
Suspended wall beam without notch impact strength
6.40mm
ASTM D256
340 J/m
flammability
Test Condition
Test Method
Test Result
Extreme Oxygen Index
ISO 489
45 %
UL flame retardant rating
0.30mm
UL 94
V-0
mechanical properties
Test Condition
Test Method
Test Result
bending strength
Yield,200°C
ASTM D790
29.0 Mpa
shear strength
ASTM D732
53.0 Mpa
bending strength
Yield,23°C
ASTM D790
145 Mpa
Bending modulus
200°C
ASTM D790
4500 Mpa
Bending modulus
23°C
ASTM D790
12100 Mpa
elongation
Break
ASTM D638
4.5 %
tensile strength
Yield
ASTM D638
134 Mpa
Poisson's ratio
7.58 0.41
thermal performance
Test Condition
Test Method
Test Result
thermal conductivity
JISR2618
0.56 W/m/K
Linear coefficient of thermal expansion
TD:150°C
Internal Method
6.3E-05 cm/cm/°C
Linear coefficient of thermal expansion
MD:150°C
Internal Method
1E-05 cm/cm/°C
Hot deformation temperature
1.8MPa,Unannealed
ASTM D648
270 °C
Physical properties
Test Condition
Test Method
Test Result
Shrinkage rate
MD
Internal Method
0.11 %
Water absorption rate
Saturation
ASTM D570
0.020 %
Shrinkage rate
TD
Internal Method
0.63 %
Electrical performance
Test Condition
Test Method
Test Result
Dielectric constant
1MHz
ASTM D150
4.10
Dielectric constant
1kHz
ASTM D150
4.70
Volume resistivity
ASTM D257
1E+15 ohms·cm
Compared to the anti leakage trace index
IEC 60112
PLC 4
Arc resistance
ASTM D495
180 sec
Dissipation factor
1MHz
ASTM D150
0.030
Dissipation factor
1kHz
ASTM D150
0.024
hardness
Test Condition
Test Method
Test Result
Rockwell hardness
R-Scale
ASTM D785
101
Supplementary Information
Test Condition
Test Method
Test Result
Solder resistance
Internal Method
295 °C
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.