Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

LCP E6807LHF B SUMITOMO JAPAN
SUMIKASUPER®
Household appliances,Household appliances,Spool,Laptop case
Low warpage,Flame retardant,Processability,Glass fiber reinforced,Filler: Long glass fiber
UL
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
Supplementary Information | Test Condition | Test Method | SUMITOMO JAPAN/E6807LHF B |
---|---|---|---|
Solder resistance | Internal Method | 295 °C |
hardness | Test Condition | Test Method | SUMITOMO JAPAN/E6807LHF B |
---|---|---|---|
Rockwell hardness | R-Scale | ASTM D785 | 101 |
thermal performance | Test Condition | Test Method | SUMITOMO JAPAN/E6807LHF B |
---|---|---|---|
Hot deformation temperature | 1.8MPa,Unannealed | ASTM D648 | 270 °C |
Linear coefficient of thermal expansion | TD:150°C | Internal Method | 6.3E-05 cm/cm/°C |
MD:150°C | Internal Method | 1E-05 cm/cm/°C | |
thermal conductivity | JISR2618 | 0.56 W/m/K |
mechanical properties | Test Condition | Test Method | SUMITOMO JAPAN/E6807LHF B |
---|---|---|---|
Bending modulus | 200°C | ASTM D790 | 4500 Mpa |
23°C | ASTM D790 | 12100 Mpa | |
bending strength | Yield,23°C | ASTM D790 | 145 Mpa |
Yield,200°C | ASTM D790 | 29.0 Mpa | |
elongation | Break | ASTM D638 | 4.5 % |
Poisson's ratio | 7.58 0.41 | ||
shear strength | ASTM D732 | 53.0 Mpa | |
tensile strength | Yield | ASTM D638 | 134 Mpa |
Electrical performance | Test Condition | Test Method | SUMITOMO JAPAN/E6807LHF B |
---|---|---|---|
Arc resistance | ASTM D495 | 180 sec | |
Compared to the anti leakage trace index | IEC 60112 | PLC 4 | |
Dielectric constant | 1MHz | ASTM D150 | 4.10 |
1kHz | ASTM D150 | 4.70 | |
Dissipation factor | 1MHz | ASTM D150 | 0.030 |
1kHz | ASTM D150 | 0.024 | |
Volume resistivity | ASTM D257 | 1E+15 ohms·cm |
Physical properties | Test Condition | Test Method | SUMITOMO JAPAN/E6807LHF B |
---|---|---|---|
Shrinkage rate | MD | Internal Method | 0.11 % |
TD | Internal Method | 0.63 % | |
Water absorption rate | Saturation | ASTM D570 | 0.020 % |
impact performance | Test Condition | Test Method | SUMITOMO JAPAN/E6807LHF B |
---|---|---|---|
Suspended wall beam without notch impact strength | 6.40mm | ASTM D256 | 340 J/m |
flammability | Test Condition | Test Method | SUMITOMO JAPAN/E6807LHF B |
---|---|---|---|
Extreme Oxygen Index | ISO 489 | 45 % | |
UL flame retardant rating | 0.30mm | UL 94 | V-0 |