Material Properties:UV resistance｜High rigidity｜wear resistant
Application Areas:Household appliances｜Thin walled products｜Automotive sector｜Bottle cap｜Electronic field｜Electrical field
Color:--
Grade:Injection grade

Material Certification

Technical Data Sheet Compare

physical property	Test Condition	Test Method	Test Result
melt mass-flow rate		ASTM D-1238	7 g/10min

Mechanical properties	Test Method	Test Result
Flexural modulus	ASTM D-790	3300(480) MPa（kpsi）
elongation at break	ASTM D-638	33 %
elongation at yield	ASTM D-638	11 %
Tensile modulus	ASTM D-638	3380(490) MPa（kpsi）
Bending pressure	ASTM D-790	105(15) MPa（kpsi）
tensile strength	ASTM D-638	72(10.4) MPa（kpsi）
Suspended wall beam without notch impact strength	ASTM D-256	73(1.4) J/m(n lb/in)
Impact strength of cantilever beam gap	ASTM D-4812	NB J/m(n lb/in)
Charpy Notched Impact Strength	ASTM D256/ISO 179	73（1.4） kg·cm/cm(J/M)ft·lb/in
Impact strength of cantilever beam gap	ASTM D256/ISO 179	NB kg·cm/cm(J/M)ft·lb/in
elongation at break	ASTM D638/ISO 527	33 %
Tensile modulus	ASTM D638/ISO 527	3380（490） kg/cm²(MPa)[Lb/in²]
tensile strength	ASTM D638/ISO 527	72（10.4） kg/cm²(MPa)[Lb/in²]
elongation	ASTM D638/ISO 527	11 %
Flexural modulus	ASTM D790/ISO 178	3300（480） kg/cm²(MPa)[Lb/in²]

Physical properties	Test Condition	Test Method	Test Result
melt mass-flow rate		ASTM D1238/ISO 1133	7 g/10min

Thermal performance	Test Method	Test Result
Linear coefficient of thermal expansion	ASTM E-831	1.11(0.62) E4/K(E4/F)
Heat distortion temperature	ASTM D-648	169 (336)/114(237) °C
melting temperature	ASTM D-3418	178（352） ℃（℉）
Linear coefficient of thermal expansion	ASTM E-831	1.17(0.65) E4/K(E4/F)
Heat distortion temperature	ASTM D648/ISO 75	169 (336)/114(237) ℃（℉）
melting temperature		178（352） ℃（℉）

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top