Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

POM 511P DUPONT USA
Delrin®
Household appliances、Thin walled products、Automotive sector、Bottle cap、Electronic field、Electrical field
UV resistance、High rigidity、wear resistant
UL
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
Mechanical properties | Test Condition | Test Method | DUPONT USA/511P |
---|---|---|---|
Impact strength of cantilever beam gap | ASTM D256/ISO 179 | NB kg·cm/cm(J/M)ft·lb/in | |
elongation at yield | 50mm/min(0.2in/min) | ASTM D-638 | 11 % |
Bending pressure | ASTM D-790 | 105(15) MPa(kpsi) | |
Flexural modulus | ASTM D790/ISO 178 | 3300(480) kg/cm²(MPa)[Lb/in²] | |
ASTM D-790 | 3300(480) MPa(kpsi) | ||
elongation | ASTM D638/ISO 527 | 11 % | |
elongation at break | ASTM D638/ISO 527 | 33 % | |
50mm/min(0.2in/min) | ASTM D-638 | 33 % | |
tensile strength | ASTM D638/ISO 527 | 72(10.4) kg/cm²(MPa)[Lb/in²] | |
Tensile modulus | 50mm/min(0.2in/min) | ASTM D-638 | 3380(490) MPa(kpsi) |
tensile strength | 屈服,50mm/min(0.2in/min) | ASTM D-638 | 72(10.4) MPa(kpsi) |
Impact strength of cantilever beam gap | ASTM D-4812 | NB J/m(n lb/in) | |
Tensile modulus | ASTM D638/ISO 527 | 3380(490) kg/cm²(MPa)[Lb/in²] | |
Charpy Notched Impact Strength | ASTM D256/ISO 179 | 73(1.4) kg·cm/cm(J/M)ft·lb/in | |
Suspended wall beam without notch impact strength | ASTM D-256 | 73(1.4) J/m(n lb/in) |
Physical properties | Test Condition | Test Method | DUPONT USA/511P |
---|---|---|---|
melt mass-flow rate | ASTM D1238/ISO 1133 | 7 g/10min |
physical property | Test Condition | Test Method | DUPONT USA/511P |
---|---|---|---|
melt mass-flow rate | 1.05kg nt 190C | ASTM D-1238 | 7 g/10min |
Thermal performance | Test Condition | Test Method | DUPONT USA/511P |
---|---|---|---|
Heat distortion temperature | 0.45MPa(66psi)/1.8MPa(264psi),HDT | ASTM D-648 | 169 (336)/114(237) °C |
Linear coefficient of thermal expansion | 23-55C(73-130F),MD | ASTM E-831 | 1.11(0.62) E4/K(E4/F) |
Heat distortion temperature | HDT | ASTM D648/ISO 75 | 169 (336)/114(237) ℃(℉) |
melting temperature | ASTM D-3418 | 178(352) ℃(℉) | |
178(352) ℃(℉) | |||
Linear coefficient of thermal expansion | 23-55C(73-130F),Transversc | ASTM E-831 | 1.17(0.65) E4/K(E4/F) |
Contact Us
Get App
Top