Mechanical properties	Test Method	Test Result
Tensile modulus	ASTM D638	2140 Mpa
tensile strength	ASTM D638	58.6 Mpa
elongation	ASTM D638	8.0 %
Flexural modulus	ASTM D790	2280 Mpa
bending strength	ASTM D790	82.0 Mpa

Impact resistance	Test Condition	Test Method	Test Result
Suspended wall beam without notch impact strength		ASTM D4812	无断裂

Electrical performance	Test Condition	Test Method	Test Result
Surface Resistivity		ESD STM11.11	1.0E+5 - 1.0E+9 ohms
Surface Resistivity	Surface Resistivity		ASTM D257	1.0E+6 - 1.0E+10 ohms
Volume resistivity		ASTM D257	1.0E+2 - 1.0E+5 ohms·cm
static decay		FTMS 101C 4046.1	< 2.0 sec

injection	Test Condition	Test Method	Test Result
drying temperature			79 °C
drying time			4.0 hr
Dew point temperature			-40 °C
Processing (melt) temperature			232 to 282 °C
Temperature			49 to 93 °C
Injection Pressure			68.9 to 103 Mpa

Thermal performance	Test Condition	Test Method	Test Result
Heat distortion temperature		ASTM D648	64.4 °C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top