Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA6 299 M X 139424 A RTP US
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | RTP US/299 M X 139424 A |
|---|---|---|---|
| Suspended wall beam without notch impact strength | 3.20 mm | ASTM D4812 | 无断裂 |
| Mechanical properties | Test Condition | Test Method | RTP US/299 M X 139424 A |
|---|---|---|---|
| Tensile modulus | ASTM D638 | 2140 Mpa | |
| elongation | 屈服 | ASTM D638 | 8.0 % |
| bending strength | ASTM D790 | 82.0 Mpa | |
| Flexural modulus | ASTM D790 | 2280 Mpa | |
| tensile strength | ASTM D638 | 58.6 Mpa |
| Electrical performance | Test Condition | Test Method | RTP US/299 M X 139424 A |
|---|---|---|---|
| static decay | FTMS 101C 4046.1 | < 2.0 sec | |
| Surface Resistivity | -- | ASTM D257 | 1.0E+6 - 1.0E+10 ohms |
| Volume resistivity | ASTM D257 | 1.0E+2 - 1.0E+5 ohms·cm | |
| Surface Resistivity | -- | ESD STM11.11 | 1.0E+5 - 1.0E+9 ohms |
| physical property | Test Condition | Test Method | RTP US/299 M X 139424 A |
|---|---|---|---|
| Shrinkage rate | 3.20 mm，Flow | ASTM D955 | 0.60 - 0.80 % |
| water content | < 0.020 % |
| Thermal performance | Test Condition | Test Method | RTP US/299 M X 139424 A |
|---|---|---|---|
| Heat distortion temperature | 1.8 MPa, 未退火，HDT | ASTM D648 | 64.4 °C |
| injection | Test Condition | Test Method | RTP US/299 M X 139424 A |
|---|---|---|---|
| Dew point temperature | -40 °C | ||
| drying time | 4.0 hr | ||
| Injection Pressure | 68.9 to 103 Mpa | ||
| Processing (melt) temperature | 232 to 282 °C | ||
| drying temperature | 79 °C | ||
| Temperature | 49 to 93 °C |
Contact Us
Get App
Top