Technical Data Sheet impact performance Test Condition Test Method Test Result Suspended wall beam without notch impact strength 23°C ASTM D4812 500 J/m
flammability Test Condition Test Method Test Result UL flame retardant rating 0.9 mm UL 94 V-0 UL flame retardant rating 3.0 mm UL 94 5VA Burning wire flammability index 1.0 mm IEC 60695-2-12 960 °C Burning wire flammability index 3.0 mm6 IEC 60695-2-12 960 °C Hot filament ignition temperature 1.0 mm IEC 60695-2-13 700 °C Hot filament ignition temperature 3.0 mm IEC 60695-2-13 725 °C Extreme Oxygen Index ASTM D2863 29 %
mechanical properties Test Condition Test Method Test Result bending strength Break, 50.0 mm Span ASTM D790 140 Mpa Bending modulus 50.0 mm Span ASTM D790 5200 Mpa tensile strength Break ASTM D638 93.0 Mpa
injection Test Condition Test Method Test Result Exhaust hole depth 0.025 to 0.038 mm drying temperature 120 °C drying time 3.0 to 4.0 hr Suggested maximum moisture content 0.020 % Suggested injection volume 40 to 80 % Temperature at the rear of the barrel 240 to 255 °C Temperature in the middle of the barrel 245 to 260 °C Temperature at the front of the material cylinder 250 to 265 °C Spray nozzle temperature 245 to 260 °C Processing (melt) temperature 250 to 265 °C Mold temperature 65 to 90 °C Back pressure 0.300 to 0.700 Mpa Screw speed 50 to 80 rpm
thermal performance Test Condition Test Method Test Result RTI UL 746 140 °C RTI Imp UL 746 120 °C RTI Elec UL 746 120 °C Linear coefficient of thermal expansion 60 to 138°C，Flow ASTM E831 2.0E-5 cm/cm/°C Linear coefficient of thermal expansion -40 to 40°C，Flow ASTM E831 2.0E-5 cm/cm/°C Ball Pressure Test 123 to 127°C IEC 60695-10-2 通过 Hot deformation temperature 1.8 MPa, Unannealed, 6.40 mm ASTM D648 182 °C Hot deformation temperature 0.45 MPa, Unannealed, 6.40 mm ASTM D648 210 °C
Physical properties Test Condition Test Method Test Result Water absorption rate 24 hr ASTM D570 0.070 % Shrinkage rate Across FlowFlow : 3.20 to 4.60 mm Internal Method 0.80 - 1.1 % Shrinkage rate Across FlowFlow : 1.50 to 3.20 mm Internal Method 0.50 - 0.80 % Shrinkage rate Flow : 3.20 to 4.60 mm Internal Method 0.60 - 0.90 % Shrinkage rate Flow : 1.50 to 3.20 mm Internal Method 0.40 - 0.60 % Specific volume ASTM D792 0.650 cm³/g
Electrical performance Test Condition Test Method Test Result Dissipation factor 100 Hz ASTM D150 2.0E-3 Dielectric constant 1 MHz ASTM D150 3.40 Dielectric constant 100 Hz ASTM D150 3.60 Dielectric strength 3.20 mm, in Air ASTM D149 19 KV/mm Dielectric strength 1.60 mm, in Oil ASTM D149 25 KV/mm Volume resistivity ASTM D257 1.0E+15 ohms·cm Dissipation factor 1 MHz ASTM D150 0.016 Arc resistance ASTM D495 PLC 6 Compared to the anti leakage trace index UL 746 PLC 3 High arc combustion index UL 746 PLC 0 High voltage arc tracing rate UL 746 PLC 4 Hot wire ignition UL 746 PLC 3
hardness Test Condition Test Method Test Result Rockwell hardness R-Scale ASTM D785 118
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
'%20/%3e%3cg%20opacity='1'%20transform='translate(150.5%200)%20rotate(0)'%3e%3cpath%20id='路径%204'%20fill-rule='evenodd'%20style='fill:%23C70000'%20opacity='1'%20d='M494%20472.601L487%20410.101L460%20472.601L494%20472.601Z'%3e%3c/path%3e%3cpath%20id='路径%203'%20fill-rule='evenodd'%20style='fill:%23003686'%20opacity='1'%20d='M80%20620.761C152%20676.261%20250%20670.761%20264.5%20670.761C351%20664.261%20412.5%20636.261%20443.5%20620.761C536%20572.261%20580.45%20516.261%20599.5%20492.261C566.05%20492.261%20483.5%20492.261%20465.5%20492.261C408%20532.761%20385.5%20541.761%20369%20550.261C262.5%20599.761%20214%20591.261%20184%20591.261C81%20584.761%2024.3%20510.211%200%20478.261C23%20580.261%2067.5%20609.261%2080%20620.761Z'%3e%3c/path%3e%3cpath%20id='路径%202'%20fill-rule='evenodd'%20style='fill:%23003686'%20opacity='1'%20d='M427.998%202.26C325.498%2014.26%20222.068%2073.64%20247.998%2063.76C384.498%2011.76%20427.998%2024.76%20437.998%2024.76C526.998%2041.76%20559.998%2085.76%20568.998%2095.76C606.498%20142.26%20611.398%20187.06%20613.498%20206.26C631.458%20206.26%20679.498%20206.26%20703.998%20206.26C692.998%20109.26%20633.378%2063.91%20622.998%2056.26C563.998%2012.76%20513.248%205.41%20491.498%202.26C467.498%20-2.24%20437.168%201.19%20427.998%202.26Z'%3e%3c/path%3e%3cpath%20id='路径%201'%20fill-rule='evenodd'%20style='fill:%23C70000'%20opacity='1'%20d='M232%20206.763C243%20178.763%20262%20156.763%20273.5%20140.263C329%2080.2634%20374%2069.7634%20410.5%2061.2634C446.5%2052.2634%20499%2061.2634%20504.5%2061.2634C446%2039.7634%20393%2040.7634%20387.5%2040.7634C308.5%2047.2634%20259.5%2075.2634%20237%2088.7634C162.5%20135.263%20122.95%20185.313%20106%20206.763C139.86%20206.763%20221.5%20206.763%20232%20206.763Z'%3e%3c/path%3e%3c/g%3e%3cpath%20id='减去顶层'%20fill-rule='evenodd'%20style='fill:%23003686'%20opacity='1'%20d='M379.519,227.698l4.237,4.101l-38.576,198.188h98.804l3.966,3.839l-7.614,38.817h-147.091l-4.064,-3.934l46.975,-241.011zM900.883,363.706c-21,-8.75%20-34.89067,-17.22667%20-41.672,-25.43c-6.78133,-8.20333%20-10.172,-19.19533%20-10.172,-32.976c0,-24.06267%208.832,-43.75033%2026.496,-59.063c17.664,-15.312%2040.55067,-22.968%2068.66,-22.968c11.266,0%2022.231,1.121%2032.895,3.363c10.664,2.242%2020.974,5.60533%2030.93,10.09l-8.139,40.672l-5.05,2.827c-6.54467,-5.18467%20-13.96233,-9.21167%20-22.253,-12.081c-9.95333,-3.44533%20-21.00033,-5.168%20-33.141,-5.168c-12.906,0%20-23.406,3.08967%20-31.5,9.269c-8.09333,6.18%20-12.14,14.08233%20-12.14,23.707c0,9.18733%2010.06233,18.32%2030.187,27.398l1.149,0.493l19.031,8.367c15.96867,7.10933%2027.64433,15.668%2035.027,25.676c7.38267,10.00733%2011.074,22.28467%2011.074,36.832c0,25.156%20-8.80467,45.226%20-26.414,60.21c-17.60933,14.98467%20-41.39833,22.477%20-71.367,22.477c-12.03133,0%20-24.30867,-1.422%20-36.832,-4.266c-12.52333,-2.84333%20-25.56633,-7.16367%20-39.129,-12.961l8.62,-44.559l4.63,-2.592c9.52333,7.45333%2019.435,13.24467%2029.735,17.374c11.59333,4.64867%2023.24167,6.973%2034.945,6.973c14.54667,0%2025.97633,-3.19933%2034.289,-9.598c8.31267,-6.39867%2012.469,-15.06667%2012.469,-26.004c0,-6.78133%20-1.914,-12.66%20-5.742,-17.636c-3.82867,-4.97667%20-9.51633,-9.051%20-17.063,-12.223zM54.3672,227.698h68.9058c25.81267,0%2045.473,5.004%2058.981,15.012c13.50733,10.008%2020.261,24.58233%2020.261,43.723c0,12.46867%20-1.996,24.82767%20-5.988,37.077c-3.992,12.25%20-9.16,21.98467%20-15.504,29.204c-8.53133,9.95267%20-19.14067,17.14433%20-31.828,21.575c-12.68733,4.42867%20-29.14817,6.643%20-49.3825,6.643h-26.9063l-17.8828,91.711h-43.7778l-3.88732,-3.761zM642.062,227.698h59.063l18.238,240.969l-4.109,3.976h-43.66l-2.297,-60.539h-0.041l-1.756,-40.844l-0.04,-0.002l-3.249,-98.607l-41.151,94.615l-0.06,-0.006l-20.5,47.5h0.005l-25.411,57.883h-43.849l-3.589,-3.474zM94.7266,268.386l-13.7813,71.859h23.4607c15.96867,0%2027.918,-3.69133%2035.848,-11.074c7.92933,-7.38267%2011.894,-18.457%2011.894,-33.223c0,-9.95333%20-2.84367,-17.03533%20-8.531,-21.246c-5.68733,-4.21067%20-15.367,-6.316%20-29.039,-6.316z'%3e%3c/path%3e%3c/svg%3e)
