PA66 Leona™ 1330G ASAHI JAPAN
195
- Unit Price:US$ 4,155 /MT
- Packaging Specification:25 KG/PKG
- Packaging Material:Paper bag
- Supply Quantity:77.3MT
- Delivery Terms:FOB
- Port of Loading :China Main Port
- Accepted Payment Methods:T/T
- Shipping:Negotiate supplier for shipping details
Supplier Information
ASIA PLASTIC EXCHANGE LIMITED
+86 755 ********View
serv********View
For more details, please contact the supplier!
Material Description
- Material Properties:Lubricity｜Low friction coefficient｜high strength
- Application Areas:Engine hood parts｜Automotive sector｜Industrial applications｜component
- Color:--
- Grade:Enhanced level
Material Certification
Technical Data Sheet
Compare
| hardness | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Rockwell hardness | M计秤 | ASTM D785 | 89 |
| R计秤 | ASTM D785 | 120 | |
| M计秤 | ISO 2039-2 | 89 | |
| R计秤 | ISO 2039-2 | 120 |
| other | Test Condition | Test Method | Test Result |
|---|---|---|---|
| characteristic | 高刚性.润滑性 | ||
| purpose | 轴受部件 |
| thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Combustibility (rate) | UL 94 | HB | |
| Heat Deflection Temperature | HDT | ASTM D648/ISO 75 | 248 ℃（℉） |
| 1.8MPa,未退火 | ASTM D648 | 248 °C | |
| 1.8MPa,未退火 | ISO 75-2/A | 246 °C | |
| Linear coefficient of thermal expansion | MD | ASTM D696 | 3E-05 cm/cm/°C |
| Heat Deflection Temperature | 0.45MPa,未退火 | ASTM D648 | 260 °C |
| 0.45MPa,未退火 | ISO 75-2/B | 261 °C | |
| UL flame retardant rating | 干 | UL 94 | HB |
| Heat Deflection Temperature | 1.82MPa,干 | ASTM D-648 | 248 °C |
| Linear coefficient of thermal expansion | 干 | ASTM D-696 | 3 ×10-5/K |
| Heat Deflection Temperature | 0.46MPa,干 | ASTM D-648 | 260 °C |
| flammability | Test Condition | Test Method | Test Result |
|---|---|---|---|
| UL flame retardant rating | 0.75mm | UL 94 | HB |
| Basic performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Water absorption rate | 湿 | 1.4 % |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of simply supported beam without notch | ISO 179 | 71 kJ/m² |
| Physical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTM D792/ISO 1183 | 1.48 | |
| shrinkage rate | ASTM D955 | 0.5-1.0 % | |
| Water absorption rate | ASTM D570/ISO 62 | 1.4 % | |
| 平衡,23°C,50%RH | ISO 62 | -- % | |
| shrinkage rate | TD | 内部方法 | 1.0 % |
| MD | 内部方法 | 0.50 % | |
| 吸水率(饱和,23°C) | 内部方法 | -- % | |
| Wear factor | 湿 | ASTM D-1044 | 9 ×10-6kg/1000times |
| shrinkage rate | 干 | 旭化成方法 | 0.5-1.0 % |
| mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Rockwell hardness | ASTM D785 | R120 | |
| flexural modulus | ASTM D790/ISO 178 | 8040(MPa) kg·cm/cm(J/M)ft·lb/in | |
| bending strength | ASTM D790/ISO 178 | 245(MPa) kg·cm/cm(J/M)ft·lb/in | |
| Tensile modulus | 23°C | ISO 527-2 | 9800 Mpa |
| tensile strength | ASTM D638 | 157 Mpa | |
| 断裂,23°C | ISO 527-2 | 144 Mpa | |
| elongation | 断裂 | ASTM D638 | 3.0 % |
| Tensile strain | 断裂,23°C | ISO 527-2 | 4.0 % |
| flexural modulus | ASTM D790 | 8000 Mpa | |
| 23°C | ISO 178 | 8700 Mpa | |
| bending strength | ASTM D790 | 245 Mpa | |
| 23°C | ISO 178 | 235 Mpa | |
| Taber abraser | 1000Cycles | ASTM D1044 | -- mg |
| bending strength | 干(湿) | ASTM D-790 | 245(177) Mpa |
| Elongation at break | 干(湿) | ASTM D-638 | 3(3) % |
| Rockwell hardness | 干(湿) | ASTM D-785 | 89(60) M Scale |
| Impact strength of cantilever beam gap | 干(湿) | ASTM D-256 | 98(118) J/m |
| flexural coefficient | 干(湿) | ASTM D-790 | 8.0(6.3) GPa |
| Rockwell hardness | 干(湿) | ASTM D-785 | 120(108) R scale |
| tensile strength | 干(湿) | ASTM D-638 | 157(118) Mpa |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top