Material Properties:Glass fiber reinforced|enhance|Filler: Glass mineral
Application Areas:Automotive sector|Casters|Electronic field|Electrical field
Color:--
Grade:Fill level
Technical Data Sheet
impact performance
Test Condition
Test Method
Test Result
Suspended wall beam without notch impact strength
ASTM D256
210 J/m
machinability
Test Condition
Test Method
Test Result
Shrinkage rate
Across Flow
ASTM D-955
0.6 %
Shrinkage rate
Flow
ASTM D-955
0.3 %
flammability
Test Condition
Test Method
Test Result
UL flame retardant rating
UL 94
V-0
Basic Performance
Test Condition
Test Method
Test Result
density
ASTM D-792
1.94
mechanical properties
Test Condition
Test Method
Test Result
Rockwell hardness
ASTM D-785
121
tensile strength
ASTM D-638
123 Mpa
bending strength
ASTM D-790
225 Mpa
Bending modulus
ASTM D-790
20 GPa
Charpy Notched Impact Strength
有Notched
ASTM D-256
64 J/m
Charpy Notched Impact Strength
Unnotched
ASTM D-256
206 J/m
Elongation at Break
ASTM D-638
0.8 %
tensile strength
ASTM D638
116 Mpa
elongation
Break
ASTM D638
0.60 %
Bending modulus
ASTM D790
20000 Mpa
bending strength
ASTM D790
221 Mpa
Tensile Weld Strength
ASTM D638
39.0 Mpa
thermal performance
Test Condition
Test Method
Test Result
Linear coefficient of thermal expansion
自定标准
2
UL flame retardant rating
UL 94
V-0
Hot deformation temperature
1.82MPa
ASTM D-648
>260 °C
Hot deformation temperature
1.8MPa,Unannealed
ASTM D648
>260 °C
Melting temperature
Internal Method
285 °C
Physical properties
Test Condition
Test Method
Test Result
melt mass-flow rate
315°C/5.0kg
ASTM D1238
90 g/10min
Shrinkage rate
MD
Internal Method
0.30 %
Shrinkage rate
TD
Internal Method
0.60 %
Water absorption rate
Equilibrium
ASTM D570
>0.020 %
Electrical performance
Test Condition
Test Method
Test Result
Dielectric strength
ASTM D-149
14 KV/mm
Volume resistivity
ASTM D-257
4×1016 Ω.cm
Dielectric constant
1MHz
ASTM D-150
4.9
Dissipation factor
1MHz
ASTM D-150
0.0015
thermal conductivity
自定标准
0.48 W/m.K
Volume resistivity
ASTM D257
1E+18 ohms·cm
Dielectric strength
ASTM D149
15 KV/mm
Dielectric constant
1MHz
ASTM D150
4.90
Dissipation factor
1MHz
ASTM D150
1.5E-03
Arc resistance
ASTM D495
150 sec
hardness
Test Condition
Test Method
Test Result
Rockwell hardness
R-Scale
ASTM D785
121
Supplementary Information
Test Condition
Test Method
Test Result
BarFlowLength
1.00mm
Internal Method
125 mm
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.