PA612 SC315 NC010 DUPONT USA
168
- Unit Price:US$ 6,244 /MT
- Packaging Specification:25 KG/PKG
- Packaging Material:Paper bag
- Supply Quantity:25MT
- Delivery Terms:FOB
- Port of Loading :China Main Port
- Accepted Payment Methods:T/T
- Shipping:Negotiate supplier for shipping details
Supplier Information
ASIA PLASTIC EXCHANGE LIMITED
+86 755 ********View
serv********View
For more details, please contact the supplier!
Material Description
- Material Properties:--
- Application Areas:--
- Color:--
- Grade:--
Technical Data Sheet
Compare
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Shrinkage rate | ISO 294-4 | 1.4 % | |
| ISO 294-4 | 1.3 % | ||
| Water absorption rate | ISO 62 | 3.0 % | |
| ISO 62 | 1.3 % | ||
| viscosity number | ISO 307 | 95.0 cm³/g |
| hardness | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Rockwell hardness | ISO 2039-2 | 114 |
| flammability | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Limiting Oxygen Index | ISO 4589-2 | 27 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile modulus | ISO 527-2 | 2400 Mpa | |
| tensile strength | ISO 527-2 | 62.0 Mpa | |
| Tensile strain | ISO 527-2 | 4.5 % | |
| Nominal tensile fracture strain | ISO 527-2 | 17 % | |
| Flexural modulus | ISO 178 | 2100 Mpa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of simply supported beam without notch | ISO 179/1eU | 无断裂 | |
| ISO 179/1eU | 无断裂 |
| Filling analysis | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Melt density | 0.900 g/cm³ | ||
| Specific Heat Capacity of Melt | 2750 J/kg/°C | ||
| Thermal Conductivity of Melt | 0.18 W/m/K | ||
| Emission of Organic Compounds | VDA 277 | 3.10 µgC/g |
| squeeze out | Test Condition | Test Method | Test Result |
|---|---|---|---|
| drying temperature | 80 °C | ||
| drying time | 3.0 to 4.0 hr | ||
| Suggested maximum moisture content | 0.060 % | ||
| Melt Temperature | 235 to 250 °C | ||
| Extrusion Melt Temperature, Optimum | 240 °C |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Volume resistivity | IEC 62631-3-1 | 1.0E+13 ohms·m | |
| dielectric strength | IEC 60243-1 | 30 KV/mm | |
| relative permittivity | IEC 62631-2-1 | 3.20 | |
| IEC 62631-2-1 | 3.60 | ||
| Dissipation Factor | IEC 62631-2-1 | 0.014 | |
| IEC 62631-2-1 | 0.016 | ||
| Compared to the Leakage Tracking Index (CTI) | IEC 60112 | V |
| injection | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Drying time - hot air dryer | 2.0 to 4.0 hr | ||
| Suggested maximum moisture content | 0.15 % | ||
| Processing (melt) temperature | 230 to 290 °C | ||
| Melt Temperature, Optimum | 250 °C | ||
| Temperature | 50 to 90 °C | ||
| Mold Temperature, Optimum | 70 °C | ||
| pressure holding | 50.0 to 100 Mpa | ||
| yes | |||
| Hold Pressure Time | 4.00 s/mm |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | ISO 75-2/B | 135 °C | |
| ISO 75-2/A | 62.0 °C | ||
| vicat | ISO 306/B50 | 181 °C | |
| melting temperature | ISO 11357-3 | 218 °C | |
| Linear coefficient of thermal expansion | ISO 11359-2 | 1.1E-4 cm/cm/°C | |
| ISO 11359-2 | 9.0E-5 cm/cm/°C | ||
| ISO 11359-2 | 1.6E-4 cm/cm/°C | ||
| ISO 11359-2 | 1.2E-4 cm/cm/°C | ||
| ISO 11359-2 | 9.0E-5 cm/cm/°C | ||
| ISO 11359-2 | 1.8E-4 cm/cm/°C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top