thermal performance	Test Condition	Test Method	Test Result
Heat Deflection Temperature	0.45MPa,未退火,6.40mm	ASTM D648	146 °C
Heat Deflection Temperature	Heat Deflection Temperature	1.8MPa,未退火,6.40mm	ASTM D648	142 °C
vicat		ASTM D15257	154 °C
Linear coefficient of thermal expansion	MD：-40到95°C	ASTME831	3.2E-05 cm/cm/°C
thermal conductivity		ASTMC177	0.20 W/m/K

Impact resistance	Test Condition	Test Method	Test Result
23°C		ASTM D256	100 J/m
-30°C		ISO 180/1A	9.0 kJ/m²
23°C		ISO 180/1A	10 kJ/m²
Suspended wall beam without notch impact strength	23°C	ASTM D4812	2100 J/m

Physical properties	Test Condition	Test Method	Test Result
Specific volume		ASTM D792	0.800 cm³/g
melt mass-flow rate	300°C/1.2kg	ASTM D1238	21 g/10min
shrinkage rate	MD：3.20mm	内部方法	0.20-0.40 %
Water absorption rate	平衡,23°C	ASTM D570	0.31 %

Electrical performance	Test Condition	Test Method	Test Result
volume resistivity		ASTM D257	>1.0E+17 ohms·cm
dielectric strength	3.20mm,inAir	ASTM D149	18 KV/mm

mechanical properties	Test Condition	Test Method	Test Result
tensile strength	断裂	ASTM D638	53.0 Mpa
elongation	断裂	ASTM D638	15 %
flexural modulus	50.0mm跨距	ASTM D790	3440 Mpa
bending strength	屈服,50.0mm跨距	ASTM D790	100 Mpa

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top