Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PC HF503R-701 SABIC INNOVATIVE SHANGHAI
LEXAN™
fibre
High impact resistance,High rigidity,Glass fiber reinforced,enhance
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| thermal performance | Test Condition | Test Method | SABIC INNOVATIVE SHANGHAI/HF503R-701 |
|---|---|---|---|
| Hot deformation temperature | 1.8MPa,Unannealed,6.40mm | ASTM D648 | 142 °C |
| 0.45MPa,Unannealed,6.40mm | ASTM D648 | 146 °C | |
| Linear coefficient of thermal expansion | MD:-40to95°C | ASTME831 | 3.2E-05 cm/cm/°C |
| thermal conductivity | ASTMC177 | 0.20 W/m/K | |
| Vicat softening temperature | ASTM D15257 | 154 °C |
| mechanical properties | Test Condition | Test Method | SABIC INNOVATIVE SHANGHAI/HF503R-701 |
|---|---|---|---|
| Bending modulus | 50.0mmSpan | ASTM D790 | 3440 Mpa |
| bending strength | Yield,50.0mmSpan | ASTM D790 | 100 Mpa |
| elongation | Break | ASTM D638 | 15 % |
| tensile strength | Break | ASTM D638 | 53.0 Mpa |
| Electrical performance | Test Condition | Test Method | SABIC INNOVATIVE SHANGHAI/HF503R-701 |
|---|---|---|---|
| Dielectric strength | 3.20mm,inAir | ASTM D149 | 18 KV/mm |
| Volume resistivity | ASTM D257 | >1.0E+17 ohms·cm |
| Physical properties | Test Condition | Test Method | SABIC INNOVATIVE SHANGHAI/HF503R-701 |
|---|---|---|---|
| melt mass-flow rate | 300°C/1.2kg | ASTM D1238 | 21 g/10min |
| Shrinkage rate | MD:3.20mm | Internal Method | 0.20-0.40 % |
| Specific volume | ASTM D792 | 0.800 cm³/g | |
| Water absorption rate | Equilibrium,23°C | ASTM D570 | 0.31 % |
| impact performance | Test Condition | Test Method | SABIC INNOVATIVE SHANGHAI/HF503R-701 |
|---|---|---|---|
| 23°C | ASTM D256 | 100 J/m | |
| ISO 180/1A | 10 kJ/m² | ||
| -30°C | ISO 180/1A | 9.0 kJ/m² | |
| Suspended wall beam without notch impact strength | 23°C | ASTM D4812 | 2100 J/m |