Technical Data Sheet
Compare
| physical property | Test Condition | Test Method | Test Result |
|---|
| Apparent density | | ISO 60 | 0.60 g/cm³ |
| Shrinkage rate | | ISO 294-4 | 0.81 % |
| Shrinkage rate | | ISO 294-4 | 0.10 % |
| Shrinkage rate | | ISO 294-4 | 0.29 % |
| Shrinkage rate | | ISO 294-4 | 0.050 % |
| Water absorption rate | | ISO 62 | 7.0 % |
| Water absorption rate | | ISO 62 | 2.1 % |
| hardness | Test Condition | Test Method | Test Result |
|---|
| ball-indentation hardness | | ISO 2039-1 | 193 Mpa |
| other | Test Condition | Test Method | Test Result |
|---|
| characteristic | | | 耐气候影响性能良好 热稳定性 |
| flammability | Test Condition | Test Method | Test Result |
|---|
| Burning Behavior | | ISO 3795 | passed |
| Supplementary Information | Test Condition | Test Method | Test Result |
|---|
| ISO Shortcut | | ISO 1874 | PA6.GHR.10-090.GF30 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Tensile modulus | | ASTM D638 | 8730 Mpa |
| Tensile modulus | | ISO 527-2/1 | 9400 Mpa |
| tensile strength | | ASTM D638 | 165 Mpa |
| tensile strength | | ISO 527-2/5 | 170 Mpa |
| elongation | | ASTM D638 | 3.2 % |
| Tensile strain | | ISO 527-2/5 | 3.0 % |
| Flexural modulus | | ASTM D790 | 8000 Mpa |
| Flexural modulus | | ISO 178/A | 8400 Mpa |
| bending strength | | ASTM D790 | 260 Mpa |
| bending strength | | ISO 178/A | 255 Mpa |
| bending strength | | ISO 178 | 260 Mpa |
| bending strength | | | 3.6 % |
| Tensile modulus | | ASTM D638/ISO 527 | 9910 kg/cm²(MPa)[Lb/in²] |
| tensile strength | | ASTM D638/ISO 527 | 175 kg/cm²(MPa)[Lb/in²] |
| Flexural modulus | | ASTM D790/ISO 178 | 9120 kg/cm²(MPa)[Lb/in²] |
| bending strength | | ASTM D790/ISO 178 | 276 kg/cm²(MPa)[Lb/in²] |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Suspended wall beam without notch impact strength | | ISO 180/1U | 60 kJ/m² |
| Impact strength of simply supported beam without notch | | ISO 179/1eU | 55 kJ/m² |
| Impact strength of simply supported beam without notch | | ISO 179/1eU | 65 kJ/m² |
| Suspended wall beam without notch impact strength | | ISO 180/1U | 55 kJ/m² |
| film | Test Condition | Test Method | Test Result |
|---|
| Thin film puncture strength | | ISO 6603-2 | 2.10 J |
| Thin film puncture strength | | ISO 6603-2 | 2.20 J |
| Thin film puncture strength | | ISO 6603-2 | 744 N |
| Thin film puncture strength | | ISO 6603-2 | 803 N |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| dielectric strength | | IEC 60243-1 | 33 KV/mm |
| Compared to the Leakage Tracking Index (CTI) | | IEC 60112 | PLC 1 |
| Physical properties | Test Condition | Test Method | Test Result |
|---|
| density | | ASTM D792/ISO 1183 | 1.36 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| Heat distortion temperature | | ISO 75-2/B | 219 °C |
| Heat distortion temperature | | ISO 75-2/A | 210 °C |
| Heat distortion temperature | | ISO 75-2/C | 150 °C |
| vicat | | ISO 306/B120 | 210 °C |
| ball-indentation hardness | | IEC 60695-10-2 | Pass |
| melting temperature | | ISO 11357-3 | 221 °C |
| Linear coefficient of thermal expansion | | ISO 11359-2 | 2E-05 cm/cm/°C |
| Linear coefficient of thermal expansion | | ISO 11359-2 | 1E-04 cm/cm/°C |
| Combustibility (rate) | | UL 94 | HB |
| vicat | | ASTM D1525/ISO R306 | 210 ℃（℉） |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
