PC PANLITE® AD-5503 TEIJIN JAPAN

360

Unit Price:US$ 5,277 /MT
Packaging Specification:
25 KG/PKG
Packaging Material:
Paper bag
Supply Quantity:
91.8MT
Delivery Terms:
FOB
Port of Loading :
China Main Port
Accepted Payment Methods:
T/T
Shipping:
Negotiate supplier for shipping details

Supplier Information

ASIA PLASTIC EXCHANGE LIMITED

+86 755 ********View

serv********View

For more details, please contact the supplier!

Material Description

Material Properties:transparent｜High mobility
Application Areas:Optical level
Color:--
Grade:Injection grade

Material Certification

SGS

Technical Data Sheet Compare

thermal performance	Test Condition	Test Method	Test Result
vicat		ASTM D1525/ISO R306	143 ℃（℉）
Linear coefficient of thermal expansion		ASTM D696/ISO 11359	0.7 mm/mm.℃
vicat	50℃/h 50N	ISO 308	143 °C
Linear coefficient of thermal expansion	垂直方向	ISO 11359-2	0.7 X10
Heat Deflection Temperature	1.80MPa	ISO 75-1 and ISO 75-2	124 °C
Linear coefficient of thermal expansion	平行方向	ISO 11359-2	0.7 X10
Heat Deflection Temperature	0.45MPa	ISO 75-1 and ISO 75-2	138 °C
	Heat Deflection Temperature	0.45MPa,未退火	ISO 75-2/B	138 °C
	Heat Deflection Temperature	Heat Deflection Temperature	1.8MPa,未退火	ISO 75-2/A	124 °C
vicat		ISO 306/B50	143 °C
Linear coefficient of thermal expansion	MD	ISO 11359-2	7E-05 cm/cm/°C
Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	TD	ISO 11359-2	7E-05 cm/cm/°C

optical performance	Test Condition	Test Method	Test Result
transmittance		ASTM D1003/ISO 13468	89 %
refractive index		ASTM D542/ISO 489	1.585
refractive index	refractive index		ASTM D542	1.585
transmissivity	3000µm	ASTM D1003	89.0 %

Basic performance	Test Condition	Test Method	Test Result
Water absorption rate	放置在23℃水中24h	ISO 62	0.2 %
Melt volume flow rate	300℃负荷1.2kg	ISO 1133	54 CM
shrinkage rate	平行方向	本公司制订的测定法	0.5-0.7 %
refractive index		ASTM D542	1.585
transmittance	试样厚度3mm	ASTM D1003	89 %
shrinkage rate	垂直方向	本公司制订的测定法	0.5-0.7 %
density		ISO 1183	1200 kg/m

Impact resistance	Test Condition	Test Method	Test Result
Impact strength of simply supported beam without notch		ISO 179	NoBreak

Electrical performance	Test Condition	Test Method	Test Result
dielectric constant		ASTM D150/IEC 60250	3.1
	dielectric constant		ASTM D150/IEC 60250	3
		dielectric constant	100Hz	IEO 60250	3.1
		dielectric constant	dielectric constant	1MHz	IEO 60250	3
volume resistivity		IEO 60250	>1×10 Ω.cm
dielectric strength	短时间法	IEO 60243-1	30 MV/m
Dielectric loss	1MHz，正切	IEO 60250	90 X10
arc resistance		IEO 60112	250
Dielectric loss	100Hz，正切	IEO 60250	10 X10
Surface Resistivity		IEO 60250	>1×10 Ω
dielectric strength		IEC 60243-1	30 KV/mm
relative permittivity	100Hz	IEC 60250	3.10
relative permittivity	relative permittivity	1MHz	IEC 60250	3.00
Dissipation Factor	100Hz	IEC 60250	1E-03
Dissipation Factor	Dissipation Factor	1MHz	IEC 60250	9E-03
Compared to the Leakage Tracking Index (CTI)		IEC 60112	PLC 2
Surface Resistivity		IEC 60093	>1.0E+15 ohms
volume resistivity		IEC 60093	>1.0E+15 ohms·cm

Physical properties	Test Condition	Test Method	Test Result
density		ASTM D792/ISO 1183	/1200
shrinkage rate		ASTM D955	0.5-0.7 %
Water absorption rate		ASTM D570/ISO 62	0.2 %
Melt volume flow rate	300°C/1.2kg	ISO 1133	54.0 cm3/10min
shrinkage rate	TD:4.00mm	内部方法	0.50-0.70 %
shrinkage rate	shrinkage rate	MD:4.00mm	内部方法	0.50-0.70 %
Water absorption rate	23°C,24hr	ISO 62	0.20 %

mechanical properties	Test Condition	Test Method	Test Result
Tensile modulus		ASTM D638/ISO 527	/2450 kg/cm²(MPa)[Lb/in²]
tensile strength		ASTM D638/ISO 527	/63 kg/cm²(MPa)[Lb/in²]
elongation		ASTM D638/ISO 527	/6 %
flexural modulus		ASTM D790/ISO 178	/2400 kg/cm²(MPa)[Lb/in²]
bending strength		ASTM D790/ISO 178	/96 kg/cm²(MPa)[Lb/in²]
elongation at yield	50mm/min	ISO 527-1 and ISO 527-2	6 %
Impact strength of cantilever beam gap	没缺口	ISO 179	NB KJ/m
Tensile stress	50mm/min	ISO 527-1 and ISO 527-2	63 Mpa
flexural modulus	2mm/min	ISO 178	2400 Mpa
bending strength	2mm/min	ISO 178	96 Mpa
Elongation at break	50mm/min	ISO 527-1 and ISO 527-2	>50 %
Impact strength of cantilever beam gap	带缺口	ISO 179	3 KJ/m
Tensile modulus	1mm/min	ISO 527-1 and ISO 527-2	2450 Mpa
Tensile modulus	Tensile modulus		ISO 527-2/1	2450 Mpa
tensile strength	屈服	ISO 527-2/50	63.0 Mpa
Tensile strain	屈服	ISO 527-2/50	6.0 %
Tensile strain	Tensile strain	断裂	ISO 527-2/50	>50 %
flexural modulus		ISO 178	2400 Mpa
bending strength		ISO 178	96.0 Mpa

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top