physical property	Test Condition	Test Method	Test Result
Melt volume flow rate		ISO 1133	100 cm3/10min
Shrinkage rate		ISO 2577	1.1 - 1.3 %
Shrinkage rate	Shrinkage rate		ISO 2577	1.0 - 1.2 %
viscosity number		ISO 307	145 cm³/g

flammability	Test Condition	Test Method	Test Result
burning rate		FMVSS 302	< 100 mm/min

Mechanical properties	Test Method	Test Result
Tensile modulus	ISO 527-2/1	4200 Mpa
tensile strength	ISO 527-2/50	75.0 Mpa
Tensile strain	ISO 527-2/50	14 %

Impact resistance	Test Condition	Test Method	Test Result
Impact strength of simply supported beam without notch		ISO 179/1eU	45 kJ/m²

injection	Test Condition	Test Method	Test Result
drying temperature			75 to 85 °C
drying time			2.0 to 4.0 hr
Processing (melt) temperature			240 to 280 °C
Temperature			60 to 80 °C

Thermal performance	Test Condition	Test Method	Test Result
melting temperature		ISO 11357-3	221 °C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top