Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA6 6B30 300 NC DOMO CHEM GERMANY
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | DOMO CHEM GERMANY/6B30 300 NC |
|---|---|---|---|
| Impact strength of simply supported beam without notch | 23°C | ISO 179/1eU | 45 kJ/m² |
| Mechanical properties | Test Condition | Test Method | DOMO CHEM GERMANY/6B30 300 NC |
|---|---|---|---|
| Tensile modulus | ISO 527-2/1 | 4200 Mpa | |
| Tensile strain | 断裂 | ISO 527-2/50 | 14 % |
| tensile strength | 断裂 | ISO 527-2/50 | 75.0 Mpa |
| flammability | Test Condition | Test Method | DOMO CHEM GERMANY/6B30 300 NC |
|---|---|---|---|
| burning rate | FMVSS 302 | < 100 mm/min |
| physical property | Test Condition | Test Method | DOMO CHEM GERMANY/6B30 300 NC |
|---|---|---|---|
| Shrinkage rate | 流量 : 23°C, 72小时 | ISO 2577 | 1.0 - 1.2 % |
| viscosity number | 96% H2SO4 | ISO 307 | 145 cm³/g |
| Melt volume flow rate | 275°C/5.0 kg | ISO 1133 | 100 cm3/10min |
| Shrinkage rate | 横向流量 : 23°C, 72小时 | ISO 2577 | 1.1 - 1.3 % |
| Thermal performance | Test Condition | Test Method | DOMO CHEM GERMANY/6B30 300 NC |
|---|---|---|---|
| melting temperature | ISO 11357-3 | 221 °C |
| injection | Test Condition | Test Method | DOMO CHEM GERMANY/6B30 300 NC |
|---|---|---|---|
| drying time | 2.0 to 4.0 hr | ||
| Processing (melt) temperature | 240 to 280 °C | ||
| drying temperature | 75 to 85 °C | ||
| Temperature | 60 to 80 °C |
Contact Us
Get App
Top