Material Properties:Fiber grade|Glass fiber reinforced|Filler: Glass fiber reinforced material|20% filler by weight
Application Areas:--
Color:--
Grade:Injection grade
Technical Data Sheet
optical performance
Test Condition
Test Method
Test Result
turbidity
3.00mm
ASTM D1003
Translucent
other
Test Condition
Test Method
Test Result
purpose
注塑.薄成型.
Color
透明
characteristic
低粘度.高流量.易脱模品级
flammability
Test Condition
Test Method
Test Result
UL flame retardant rating
3.0mm
UL 94
V-0
Basic Performance
Test Condition
Test Method
Test Result
Water absorption rate
23 ℃
ASTM D-570
0.11 %
mechanical properties
Test Condition
Test Method
Test Result
tensile strength
Break
ASTM D638
108 Mpa
elongation
Break
ASTM D638
4.0 %
Bending modulus
ASTM D790
5690 Mpa
Elongation at Break
ASTM D638/ISO 527
4.0 %
elongation
Break
ASTM D-638
4 %
bending strength
ASTM D-790
5680 Mpa
tensile strength
ASTM D-638
108 Mpa
Rockwell hardness
ASTM D-785
121
Impact strength of cantilever beam gap
V-Notched,3.2mm
ASTM D-256
10-14 kJ/m²
Bending modulus
ASTM D-790
98-137 J/m
bending strength
ASTM D790
152 Mpa
bending strength
ASTM D790/ISO 178
85 kg/cm²(MPa)[Lb/in²]
tensile strength
ASTM D638/ISO 527
640 kg/cm²(MPa)[Lb/in²]
thermal performance
Test Condition
Test Method
Test Result
Hot deformation temperature
HDT
ASTM D-648
140-148 °C
Hot deformation temperature
1.8MPa,Unannealed
ASTM D648
145 °C
Hot deformation temperature
HDT
ASTM D648/ISO 75
133 ℃(℉)
Combustibility (rate)
UL 94
V-2/1.6mm
Physical properties
Test Condition
Test Method
Test Result
Water absorption rate
23°C,24hr
ASTM D570
<0.20 %
Shrinkage rate
MD
ASTM D955
0.30-0.50 %
melt mass-flow rate
ASTM D1238/ISO 1133
15 g/10min
density
ASTM D792/ISO 1183
1.30
Electrical performance
Test Condition
Test Method
Test Result
Volume resistivity
ASTM D257/IEC 60093
10^16 Ω.cm
Arc resistance
ASTM D-495
110 sec
Dielectric constant
10HZ
ASTM D-150
3.3
Volume resistivity
ASTM D-25
1014 Ω.cm
Volume resistivity
ASTM D257
1E+16 ohms·cm
Dielectric strength
1.60mm
ASTM D149
20 KV/mm
Dielectric constant
1MHz
ASTM D150
3.20
Dissipation factor
1MHz
ASTM D150
8E-03
Arc resistance
ASTM D495
110 sec
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.