PA66 Leona™ 1500 ASAHI JAPAN
196
- Unit Price:US$ 3,984 /MT
- Packaging Specification:25 KG/PKG
- Packaging Material:Paper bag
- Supply Quantity:94.8MT
- Delivery Terms:FOB
- Port of Loading :China Main Port
- Accepted Payment Methods:T/T
- Shipping:Negotiate supplier for shipping details
Supplier Information
ASIA PLASTIC EXCHANGE LIMITED
+86 755 ********View
serv********View
For more details, please contact the supplier!
Material Description
- Material Properties:high molecular weight
- Application Areas:Fasteners｜PA board
- Color:--
- Grade:Injection grade
Technical Data Sheet
Compare
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Shrinkage rate | 旭化成方法 | 1.3-2.0 % | |
| Wear factor | ASTM D-1044 | 5 | |
| Shrinkage rate | 内部方法 | 1.3-2.0 % | |
| Water absorption rate | -- % | ||
| ISO 62 | -- % |
| hardness | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Rockwell hardness | ASTM D785 | 80 | |
| ASTM D785 | 120 | ||
| ISO 2039-2 | 80 | ||
| ISO 2039-2 | 120 |
| other | Test Condition | Test Method | Test Result |
|---|---|---|---|
| characteristic | 高粘度 |
| Basic performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Water absorption rate | 2.5 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Charpy Notched Impact Strength | ASTM D256/ISO 179 | 49 kg·cm/cm(J/M)ft·lb/in | |
| Rockwell hardness | ASTM D785 | R120 | |
| Flexural modulus | ASTM D790/ISO 178 | 2790 kg·cm/cm(J/M)ft·lb/in | |
| bending strength | ASTM D790/ISO 178 | 118 kg·cm/cm(J/M)ft·lb/in | |
| flexural coefficient | ASTM D-790 | 2.8(1.2) GPa | |
| Impact strength of cantilever beam gap | ASTM D-256 | 49(176) J/m | |
| Rockwell hardness | ASTM D-785 | 80(55) M Scale | |
| tensile strength | ASTM D-638 | 79(57) Mpa | |
| Rockwell hardness | ASTM D-785 | 120(105) R scale | |
| elongation at break | ASTM D-638 | 80(270) % | |
| bending strength | ASTM D-790 | 118(54) Mpa | |
| Tensile modulus | ISO 527-2 | 2900 Mpa | |
| tensile strength | ASTM D638 | 79.0 Mpa | |
| ISO 527-2 | 84.0 Mpa | ||
| Tensile strain | ISO 527-2 | 4.5 % | |
| elongation | ASTM D638 | 80 % | |
| Tensile strain | ISO 527-2 | -- % | |
| Flexural modulus | ASTM D790 | 2800 Mpa | |
| ISO 178 | 2700 Mpa | ||
| bending strength | ASTM D790 | 118 Mpa | |
| ISO 178 | 110 Mpa | ||
| Taber abraser | ASTM D1044 | -- mg |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of simply supported beam without notch | ISO 179 | NoBreak |
| Physical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTM D792/ISO 1183 | 1.14 | |
| Water absorption rate | ASTM D570/ISO 62 | 2.5 % |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| dielectric strength | IEC 60243-1 | 20 KV/mm | |
| Compared to the Leakage Tracking Index (CTI) | IEC 60112 | PLC 0 | |
| Surface Resistivity | ASTM D257 | 1E+14 ohms | |
| IEC 60093 | 1E+14 ohms | ||
| Volume resistivity | ASTM D257 | 1E+15 ohms·cm | |
| IEC 60093 | 1E+15 ohms·cm | ||
| dielectric strength | ASTM D149 | 20 KV/mm |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | ASTM D648/ISO 75 | 230 ℃（℉） | |
| Linear coefficient of thermal expansion | ASTM D696/ISO 11359 | 8 mm/mm.℃ | |
| thermal conductivity | 0.2 W/(m.K) | ||
| specific heat | 1670 J/(kg.k) | ||
| Heat distortion temperature | ASTM D-648 | 230 °C | |
| Linear coefficient of thermal expansion | ASTM D-696 | 8 | |
| Heat distortion temperature | ASTM D-648 | 70 °C | |
| ASTM D648 | 230 °C | ||
| ISO 75-2/B | 195 °C | ||
| ASTM D648 | 70.0 °C | ||
| ISO 75-2/A | 65.0 °C | ||
| Linear coefficient of thermal expansion | ASTM D696 | 8E-05 cm/cm/°C | |
| specific heat | 1670 J/kg/°C | ||
| thermal conductivity | 0.20 W/m/K |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top