Material Properties:Antichemical｜Creep resistance｜High impact resistance｜Thermal stability｜Weather resistance｜Medium to high viscosity
Application Areas:Automotive sector｜Electronic data processing｜Mechanical components｜Industrial components
Color:--
Grade:Impact resistant grade

Technical Data Sheet Compare

other	Test Condition	Test Method	Test Result
characteristic			抗撞击性高、韧性好、中等粘性

Basic performance	Test Method	Test Result
melt mass-flow rate	ISO 1133	5.0 g/10 min
Water absorption rate	ASTM D570	0.24 %
melt mass-flow rate	ASTM D1238	4.0 g/10 min

Mechanical properties	Test Method	Test Result
elongation	ASTM D638	300 %
Flexural modulus	ASTM D790	1340 MPa
bending strength	ASTM D790	47.0 MPa
Flexural modulus	ISO 178	1400 MPa
bending strength	ISO 178	53.0 MPa
Impact strength of simply supported beam without notch	ISO 179/1eA	18 kJ/m²
Impact strength of cantilever beam gap	ASTM D256	255 J/m
Flexural modulus	ASTM D790/ISO 178	181000 kg/cm²(MPa)[Lb/in²]
bending strength	ASTM D790/ISO 178	6670 kg/cm²(MPa)[Lb/in²]

Other performance	Test Condition	Test Method	Test Result
UL flame retardant rating		UL 94	HB
Relative Heat Index (RTI)		UL 746	50.0 °C
	Relative Heat Index (RTI)		UL 746	50.0 °C
	Relative Heat Index (RTI)	Relative Heat Index (RTI)		UL 746	50.0 °C

Physical properties	Test Condition	Test Method	Test Result
density		ASTM D792/ISO 1183	1.34

Thermal performance	Test Condition	Test Method	Test Result
Heat distortion temperature		ASTM D648	83.0 °C
Heat distortion temperature	Heat distortion temperature		ISO 75-2/A	72.0 °C
Linear coefficient of thermal expansion		ASTM D696	0.00013 cm/cm/°C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top