Material Properties:High impact resistance｜heat-resisting｜Good toughness and chemical resistance
Application Areas:electrical equipment｜Lighting applications｜Electric｜Electronic application field｜Phone
Color:--
Grade:Toughened grade

Technical Data Sheet Compare

hardness	Test Condition	Test Method	Test Result
Rockwell hardness	R 级, 23°C, 注塑	ASTM D785	124

thermal performance	Test Condition	Test Method	Test Result
Heat Deflection Temperature	1.8 MPa, 未退火, 6.40 mm, 注塑	ASTM D648	137 °C
RTI Elec		UL 746	80.0 °C
RTI Imp		UL 746	80.0 °C
RTI		UL 746	80.0 °C

flammability	Test Condition	Test Method	Test Result
UL flame retardant rating	0.75 mm	UL 94	HB

Impact resistance	Test Condition	Test Method	Test Result
Impact strength of cantilever beam gap	23°C, 3.20 mm, 注塑	ASTM D256	270 J/m

Physical properties	Test Condition	Test Method	Test Result
density		ASTM D792	1.25 g/cm³
melt mass-flow rate	300°C/1.2 kg	ASTM D1238	9.0 g/10 min
shrinkage rate	23°C, 3.20 mm, 注塑，Flow	ASTM D955	0.20 - 0.40 %

injection	Test Condition	Test Method	Test Result
drying temperature			100 to 120 °C
drying time			3.0 to 5.0 hr
Suggested maximum moisture content			0.020 %
Minimum Moisture Content			0.020 %
Temperature at the rear of the barrel			280 to 295 °C
Temperature in the middle of the barrel			285 to 300 °C
Temperature at the front of the material cylinder			290 to 305 °C
Spray nozzle temperature			290 to 305 °C
Processing (melt) temperature			295 to 310 °C
mold temperature			90 to 110 °C
Back pressure			0.981 to 3.92 Mpa
screw speed			40 to 70 rpm

mechanical properties	Test Condition	Test Method	Test Result
tensile strength	屈服, 23°C, 3.20 mm, 注塑	ASTM D638	53.9 Mpa
elongation	断裂, 23°C, 3.20 mm, 注塑	ASTM D638	15 %
flexural modulus	23°C, 3.20 mm, 注塑	ASTM D790	3330 Mpa
bending strength	23°C, 3.20 mm, 注塑	ASTM D790	98.1 Mpa

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top