TPEE BEXLOY® 7246 DUPONT TAIWAN
328
- Unit Price:US$ 7,124 /MT
- Packaging Specification:25 KG/PKG
- Packaging Material:Paper bag
- Supply Quantity:114MT
- Delivery Terms:FOB
- Port of Loading :China Main Port
- Accepted Payment Methods:T/T
- Shipping:Negotiate supplier for shipping details
Supplier Information
ASIA PLASTIC EXCHANGE LIMITED
+86 755 ********View
serv********View
For more details, please contact the supplier!
Material Description
- Material Properties:Thermal stability｜Aging resistance｜Chemical resistance
- Application Areas:Medical supplies｜Nursing supplies｜film｜Casters｜Other sheets｜building materials｜Profile
- Color:--
- Grade:Injection grade
Technical Data Sheet
Compare
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ISO 1183 | 1.26 g/cm³ | |
| melt mass-flow rate | ISO 1133 | 13 g/10min | |
| Melt volume flow rate | ISO 1133 | 12.0 cm3/10min | |
| Shrinkage rate | ISO 294-4 | 1.6 % | |
| ISO 294-4 | 1.6 % | ||
| Water absorption rate | ISO 62 | 0.30 % | |
| ISO 62 | 0.60 % | ||
| ISO 62 | 0.20 % |
| hardness | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Shore hardness | ISO 868 | 68 | |
| ISO 868 | 64 |
| flammability | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Limiting Oxygen Index | ISO 4589-2 | 23 % | |
| burning rate | ISO 3795 | DNI | |
| UL flame retardant rating | UL 94,IEC60695-11-10,-20 | HB |
| Supplementary Information | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Emissions of Organic Compounds | VDA277 | 300 µgC/g |
| Filling analysis | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Melt density | 1.11 g/cm³ | ||
| SpecificHeatCapacity of Melt | 2150 J/kg/°C | ||
| ThermalConductivityofMelt | 0.15 W/m/K |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of cantilever beam gap | ISO 8256/1 | 300 kJ/m² | |
| Charpy Notched Impact Strength | ISO 179/1eA | 7.0 kJ/m² | |
| ISO 179/1eA | 8.0 kJ/m² | ||
| ISO 179/1eA | 36 kJ/m² | ||
| Impact strength of cantilever beam gap | ISO 180/1A | 7.0 kJ/m² | |
| ISO 180/1A | 38 kJ/m² |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile creep modulus | ISO 899-1 | 310 Mpa | |
| Flexural modulus | ISO 178 | 550 Mpa | |
| wear resistance | ISO 4649 | 100 mm³ | |
| Tensile modulus | ISO 527-2 | 550 Mpa | |
| tensile strength | ISO 527-2 | 26.0 Mpa | |
| ISO 527-2 | 50.0 Mpa | ||
| ISO 527-2 | 14.0 Mpa | ||
| ISO 527-2 | 23.0 Mpa | ||
| ISO 527-2 | 24.0 Mpa | ||
| Tensile strain | ISO 527-2 | 26 % | |
| ISO 527-2 | >300 % | ||
| Nominal tensile fracture strain | ISO 527-2 | 530 % | |
| Tensile creep modulus | ISO 899-1 | 360 Mpa |
| elastomer | Test Condition | Test Method | Test Result |
|---|---|---|---|
| tear strength | ISO 34-1 | 170 kN/m | |
| ISO 34-1 | 180 kN/m |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Surface Resistivity | IEC 60093 | >1.0E+15 ohms | |
| Volume resistivity | IEC 60093 | 2E+12 ohms·cm | |
| dielectric strength | IEC 60243-1 | 20 KV/mm | |
| relative permittivity | IEC 60250 | 4.00 | |
| IEC 60250 | 3.50 | ||
| Dissipation Factor | IEC 60250 | 0.016 | |
| IEC 60250 | 0.030 | ||
| Compared to the Leakage Tracking Index (CTI) | IEC 60112 | PLC 0 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Linear coefficient of thermal expansion | ISO 11359-2 | 8E-08 m²/s | |
| Heat distortion temperature | ISO 75-2/B | 100 °C | |
| ISO 75-2/A | 50.0 °C | ||
| brittle temperature | ISO 974 | -97.0 °C | |
| Glass Transition Temperature | ISO 11357-2 | 25.0 °C | |
| vicat | ISO 306/A50 | 205 °C | |
| ISO 306/B50 | 140 °C | ||
| melting temperature | ISO 11357-3 | 218 °C | |
| Linear coefficient of thermal expansion | ISO 11359-2 | 1.8E-04 cm/cm/°C | |
| ISO 11359-2 | 1.7E-04 cm/cm/°C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top