impact performance	Test Condition	Test Method	Test Result	Test Unit
Charpy Notched Impact Strength	-30°C	ISO 179/1eA	29	kJ/m²
Charpy Notched Impact Strength	Charpy Notched Impact Strength	23°C	ISO 179/1eA	75	kJ/m²
Dart impact	23°C, Total Energy	ASTM D3763	67.0	J
flammability	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating	0.50 mm	UL 94	V-2
	UL flame retardant rating	0.8 mm	UL 94	V-1
		UL flame retardant rating	1.0 mm	UL 94	V-0
			UL flame retardant rating	1.5 mm	UL 94	5VB
			UL flame retardant rating	UL flame retardant rating	3.1 mm	UL 94	5VA
Burning wire flammability index	1.0 mm	IEC 60695-2-12	960	°C
Hot filament ignition temperature	1.0 mm	IEC 60695-2-13	850	°C
Extreme Oxygen Index		ISO 4589-2	39	%
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Tensile modulus	--2	ASTM D638	2110	Mpa
Tensile modulus	Tensile modulus	--	ISO 527-2/1	2140	Mpa
tensile strength	Yield3	ASTM D638	56.0	Mpa
	tensile strength	Yield	ISO 527-2/50	57.0	Mpa
		tensile strength	Break3	ASTM D638	62.0	Mpa
		tensile strength	tensile strength	Break	ISO 527-2/50	60.0	Mpa
elongation	Yield3	ASTM D638	5.8	%
	elongation	Yield	ISO 527-2/50	5.6	%
		elongation	Break3	ASTM D638	110	%
		elongation	elongation	Break	ISO 527-2/50	110	%
Bending modulus	50.0 mm Span4	ASTM D790	2190	Mpa
Bending modulus	Bending modulus	--5	ISO 178	2180	Mpa
bending strength	--5,6	ISO 178	86.0	Mpa
bending strength	bending strength	Yield, 50.0 mm Span4	ASTM D790	88.0	Mpa
injection	Test Condition	Test Method	Test Result	Test Unit
drying temperature			120	°C
drying time			3.0 to 4.0	hr
Suggested maximum moisture content			0.020	%
Suggested injection volume			40 to 60	%
Temperature at the rear of the barrel			270 to 295	°C
Temperature in the middle of the barrel			280 to 305	°C
Temperature at the front of the material cylinder			295 to 315	°C
Spray nozzle temperature			290 to 310	°C
Processing (melt) temperature			295 to 315	°C
Mold temperature			70 to 95	°C
Back pressure			0.300 to 0.700	Mpa
Screw speed			40 to 70	rpm
Exhaust hole depth			0.025 to 0.076	mm
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	0.45 MPa, Unannealed, 3.20 mm	ASTM D648	134	°C
	Hot deformation temperature	0.45 MPa, Unannealed, 4.00 mm, 100 mm Span9	ISO 75-2/Be	131	°C
		Hot deformation temperature	1.8 MPa, Unannealed, 3.20 mm	ASTM D648	118	°C
		Hot deformation temperature	Hot deformation temperature	1.8 MPa, Unannealed, 4.00 mm, 100 mm Span9	ISO 75-2/Ae	117	°C
Vicat softening temperature	--	ISO 306/B50	136	°C
Vicat softening temperature	Vicat softening temperature	--	ISO 306/B120	138	°C
Linear coefficient of thermal expansion	Flow : -40 to 40°C	ASTM E831	6.9E-5	cm/cm/°C
	Linear coefficient of thermal expansion	Flow : 23 to 80°C	ISO 11359-2	7.4E-5	cm/cm/°C
		Linear coefficient of thermal expansion	Across Flow : -40 to 40°C	ASTM E831	7.3E-5	cm/cm/°C
		Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	Across Flow : 23 to 80°C	ISO 11359-2	7.6E-5	cm/cm/°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
melt mass-flow rate	300°C/1.2 kg	ASTM D1238	12	g/10 min
Melt Volume Flow Rate (MVR)	300°C/1.2 kg	ISO 1133	10.0	cm3/10min
Shrinkage rate	Flow : 3.20 mm	Internal Method	0.40 - 0.80	%
Shrinkage rate	Shrinkage rate	Across FlowFlow : 3.20 mm	Internal Method	0.40 - 0.80	%
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Surface resistivity		ASTM D257	> 1.0E+16	ohms
Volume resistivity		ASTM D257	> 1.0E+16	ohms·cm
Dielectric strength	3.20 mm, in Oil	ASTM D149	13	KV/mm
Dielectric constant	1.10 GHz	ASTM ES7-83	2.78
Dissipation factor	1.10 GHz	ASTM ES7-83	6.0E-3
hardness	Test Condition	Test Method	Test Result	Test Unit
Rockwell hardness	L -Sale	ASTM D785	83
Rockwell hardness	Rockwell hardness	R-Scale	ASTM D785	117

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top