plas
Material Selector
Log In
CategoriesAll
Material Comparison
Add Comparison Model
Highlight Differences
Hide Same

Product Name / Manufacturer / Model

Brand

Typical Applications

Properties

Color

Form

Processing Methods

Grade

Filler

Recycled Content

Certificates

Reference Price

PC
PC SABIC INNOVATIVE NANSHA EXL9414-BK1A068
Cold resistant grade
US$ 6,465 / MT
FOB Guangzhou port, China
injectionTest ConditionTest MethodSABIC INNOVATIVE NANSHA/EXL9414-BK1A068
Back pressure0.300 to 0.700 Mpa
Temperature at the front of the material cylinder295 to 315 °C
Screw speed40 to 70 rpm
Mold temperature70 to 95 °C
Processing (melt) temperature295 to 315 °C
Suggested injection volume40 to 60 %
Suggested maximum moisture content0.020 %
Spray nozzle temperature290 to 310 °C
Exhaust hole depth0.025 to 0.076 mm
drying temperature120 °C
Temperature in the middle of the barrel280 to 305 °C
drying time3.0 to 4.0 hr
Temperature at the rear of the barrel270 to 295 °C
mechanical propertiesTest ConditionTest MethodSABIC INNOVATIVE NANSHA/EXL9414-BK1A068
bending strength--5,6ISO 17886.0 Mpa
Bending modulus50.0 mm Span4ASTM D7902190 Mpa
bending strengthYield, 50.0 mm Span4ASTM D79088.0 Mpa
elongationBreakISO 527-2/50110 %
Yield3ASTM D6385.8 %
YieldISO 527-2/505.6 %
Break3ASTM D638110 %
tensile strengthBreakISO 527-2/5060.0 Mpa
YieldISO 527-2/5057.0 Mpa
Yield3ASTM D63856.0 Mpa
Tensile modulus--2ASTM D6382110 Mpa
--ISO 527-2/12140 Mpa
Bending modulus--5ISO 1782180 Mpa
tensile strengthBreak3ASTM D63862.0 Mpa
flammabilityTest ConditionTest MethodSABIC INNOVATIVE NANSHA/EXL9414-BK1A068
Extreme Oxygen IndexISO 4589-239 %
UL flame retardant rating0.50 mmUL 94V-2
3.1 mmUL 945VA
0.8 mmUL 94V-1
Hot filament ignition temperature1.0 mmIEC 60695-2-13850 °C
Burning wire flammability index1.0 mmIEC 60695-2-12960 °C
UL flame retardant rating1.0 mmUL 94V-0
1.5 mmUL 945VB
thermal performanceTest ConditionTest MethodSABIC INNOVATIVE NANSHA/EXL9414-BK1A068
Linear coefficient of thermal expansionAcross Flow : -40 to 40°CASTM E8317.3E-5 cm/cm/°C
Hot deformation temperature1.8 MPa, Unannealed, 4.00 mm, 100 mm Span9ISO 75-2/Ae117 °C
0.45 MPa, Unannealed, 3.20 mmASTM D648134 °C
Linear coefficient of thermal expansionFlow : -40 to 40°CASTM E8316.9E-5 cm/cm/°C
Hot deformation temperature0.45 MPa, Unannealed, 4.00 mm, 100 mm Span9ISO 75-2/Be131 °C
Linear coefficient of thermal expansionFlow : 23 to 80°CISO 11359-27.4E-5 cm/cm/°C
Vicat softening temperature--ISO 306/B50136 °C
Linear coefficient of thermal expansionAcross Flow : 23 to 80°CISO 11359-27.6E-5 cm/cm/°C
Hot deformation temperature1.8 MPa, Unannealed, 3.20 mmASTM D648118 °C
Vicat softening temperature--ISO 306/B120138 °C
Physical propertiesTest ConditionTest MethodSABIC INNOVATIVE NANSHA/EXL9414-BK1A068
Shrinkage rateAcross FlowFlow : 3.20 mmInternal Method0.40 - 0.80 %
Melt Volume Flow Rate (MVR)300°C/1.2 kgISO 113310.0 cm3/10min
Shrinkage rateFlow : 3.20 mmInternal Method0.40 - 0.80 %
melt mass-flow rate300°C/1.2 kgASTM D123812 g/10 min
Electrical performanceTest ConditionTest MethodSABIC INNOVATIVE NANSHA/EXL9414-BK1A068
Surface resistivityASTM D257> 1.0E+16 ohms
Dielectric strength3.20 mm, in OilASTM D14913 KV/mm
Volume resistivityASTM D257> 1.0E+16 ohms·cm
Dielectric constant1.10 GHzASTM ES7-832.78
Dissipation factor1.10 GHzASTM ES7-836.0E-3
hardnessTest ConditionTest MethodSABIC INNOVATIVE NANSHA/EXL9414-BK1A068
Rockwell hardnessR-ScaleASTM D785117
L -SaleASTM D78583
impact performanceTest ConditionTest MethodSABIC INNOVATIVE NANSHA/EXL9414-BK1A068
Charpy Notched Impact Strength-30°CISO 179/1eA29 kJ/m²
Dart impact23°C, Total EnergyASTM D376367.0 J
Charpy Notched Impact Strength23°CISO 179/1eA75 kJ/m²

Contact Us

Get App

Top