Technical Data Sheet hardness Test Condition Test Method Test Result Rockwell hardness R-Scale ASTM D785 117
thermal performance Test Condition Test Method Test Result Hot deformation temperature 0.45 MPa, Unannealed, 6.40 mm ASTM D648 137 °C Hot deformation temperature 1.8 MPa, Unannealed, 6.40 mm ASTM D648 98.0 °C Linear coefficient of thermal expansion -40 to 40°C，Flow ASTM E831 9.2E-5 cm/cm/°C Linear coefficient of thermal expansion 60 to 138°C，Flow ASTM E831 1.2E-4 cm/cm/°C RTI Elec UL 746 120 °C RTI Imp UL 746 120 °C RTI UL 746 140 °C
flammability Test Condition Test Method Test Result UL flame retardant rating 0.46 mm UL 94 HB UL flame retardant rating 0.64 mm UL 94 V-0 UL flame retardant rating 3.0 mm UL 94 5VA Extreme Oxygen Index ASTM D2863 30 %
Physical properties Test Condition Test Method Test Result Specific volume ASTM D792 0.750 cm³/g Shrinkage rate Flow : 0.750 to 2.30 mm Internal Method 0.80 - 1.1 % Shrinkage rate Flow : 2.30 to 4.60 mm Internal Method 1.0 - 1.4 % Shrinkage rate Across FlowFlow : 0.750 to 2.30 mm Internal Method 0.90 - 1.3 % Shrinkage rate Across FlowFlow : 2.30 to 4.60 mm Internal Method 1.2 - 1.6 % Water absorption rate 24 hr ASTM D570 0.080 % Outdoor applicability UL 746C f1
Electrical performance Test Condition Test Method Test Result Volume resistivity ASTM D257 > 1.2E+16 ohms·cm Dielectric strength 1.60 mm, in Oil ASTM D149 25 KV/mm Dielectric strength 3.20 mm, in Air ASTM D149 19 KV/mm Dielectric strength 3.20 mm, in Oil ASTM D149 19 KV/mm Dielectric constant 100 Hz ASTM D150 3.20 Dielectric constant 1 MHz ASTM D150 3.20 Dissipation factor 100 Hz ASTM D150 3.0E-3 Dissipation factor 1 MHz ASTM D150 0.030 Arc resistance ASTM D495 PLC 6 Compared to the anti leakage trace index UL 746 PLC 2 High arc combustion index UL 746 PLC 3 High voltage arc tracing rate UL 746 PLC 3 Hot wire ignition UL 746 PLC 2
injection Test Condition Test Method Test Result drying temperature 120 °C drying time 3.0 to 4.0 hr Suggested maximum moisture content 0.020 % Suggested injection volume 40 to 80 % Temperature at the rear of the barrel 240 to 255 °C Temperature in the middle of the barrel 245 to 260 °C Temperature at the front of the material cylinder 250 to 265 °C Spray nozzle temperature 245 to 260 °C Processing (melt) temperature 250 to 265 °C Mold temperature 50 to 75 °C Back pressure 0.300 to 0.700 Mpa Screw speed 50 to 100 rpm Exhaust hole depth 0.025 to 0.038 mm
mechanical properties Test Condition Test Method Test Result tensile strength Yield ASTM D638 48.0 Mpa tensile strength Break ASTM D638 48.0 Mpa elongation Break ASTM D638 110 % Bending modulus 50.0 mm Span ASTM D790 2060 Mpa bending strength Yield, 50.0 mm Span ASTM D790 82.0 Mpa bending strength Break, 50.0 mm Span ASTM D790 82.0 Mpa
impact performance Test Condition Test Method Test Result Suspended wall beam without notch impact strength 23°C ASTM D4812 3200 J/m Dart impact 23°C ASTM D3029 43.0 43.0 J
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
'%20/%3e%3cg%20opacity='1'%20transform='translate(150.5%200)%20rotate(0)'%3e%3cpath%20id='路径%204'%20fill-rule='evenodd'%20style='fill:%23C70000'%20opacity='1'%20d='M494%20472.601L487%20410.101L460%20472.601L494%20472.601Z'%3e%3c/path%3e%3cpath%20id='路径%203'%20fill-rule='evenodd'%20style='fill:%23003686'%20opacity='1'%20d='M80%20620.761C152%20676.261%20250%20670.761%20264.5%20670.761C351%20664.261%20412.5%20636.261%20443.5%20620.761C536%20572.261%20580.45%20516.261%20599.5%20492.261C566.05%20492.261%20483.5%20492.261%20465.5%20492.261C408%20532.761%20385.5%20541.761%20369%20550.261C262.5%20599.761%20214%20591.261%20184%20591.261C81%20584.761%2024.3%20510.211%200%20478.261C23%20580.261%2067.5%20609.261%2080%20620.761Z'%3e%3c/path%3e%3cpath%20id='路径%202'%20fill-rule='evenodd'%20style='fill:%23003686'%20opacity='1'%20d='M427.998%202.26C325.498%2014.26%20222.068%2073.64%20247.998%2063.76C384.498%2011.76%20427.998%2024.76%20437.998%2024.76C526.998%2041.76%20559.998%2085.76%20568.998%2095.76C606.498%20142.26%20611.398%20187.06%20613.498%20206.26C631.458%20206.26%20679.498%20206.26%20703.998%20206.26C692.998%20109.26%20633.378%2063.91%20622.998%2056.26C563.998%2012.76%20513.248%205.41%20491.498%202.26C467.498%20-2.24%20437.168%201.19%20427.998%202.26Z'%3e%3c/path%3e%3cpath%20id='路径%201'%20fill-rule='evenodd'%20style='fill:%23C70000'%20opacity='1'%20d='M232%20206.763C243%20178.763%20262%20156.763%20273.5%20140.263C329%2080.2634%20374%2069.7634%20410.5%2061.2634C446.5%2052.2634%20499%2061.2634%20504.5%2061.2634C446%2039.7634%20393%2040.7634%20387.5%2040.7634C308.5%2047.2634%20259.5%2075.2634%20237%2088.7634C162.5%20135.263%20122.95%20185.313%20106%20206.763C139.86%20206.763%20221.5%20206.763%20232%20206.763Z'%3e%3c/path%3e%3c/g%3e%3cpath%20id='减去顶层'%20fill-rule='evenodd'%20style='fill:%23003686'%20opacity='1'%20d='M379.519,227.698l4.237,4.101l-38.576,198.188h98.804l3.966,3.839l-7.614,38.817h-147.091l-4.064,-3.934l46.975,-241.011zM900.883,363.706c-21,-8.75%20-34.89067,-17.22667%20-41.672,-25.43c-6.78133,-8.20333%20-10.172,-19.19533%20-10.172,-32.976c0,-24.06267%208.832,-43.75033%2026.496,-59.063c17.664,-15.312%2040.55067,-22.968%2068.66,-22.968c11.266,0%2022.231,1.121%2032.895,3.363c10.664,2.242%2020.974,5.60533%2030.93,10.09l-8.139,40.672l-5.05,2.827c-6.54467,-5.18467%20-13.96233,-9.21167%20-22.253,-12.081c-9.95333,-3.44533%20-21.00033,-5.168%20-33.141,-5.168c-12.906,0%20-23.406,3.08967%20-31.5,9.269c-8.09333,6.18%20-12.14,14.08233%20-12.14,23.707c0,9.18733%2010.06233,18.32%2030.187,27.398l1.149,0.493l19.031,8.367c15.96867,7.10933%2027.64433,15.668%2035.027,25.676c7.38267,10.00733%2011.074,22.28467%2011.074,36.832c0,25.156%20-8.80467,45.226%20-26.414,60.21c-17.60933,14.98467%20-41.39833,22.477%20-71.367,22.477c-12.03133,0%20-24.30867,-1.422%20-36.832,-4.266c-12.52333,-2.84333%20-25.56633,-7.16367%20-39.129,-12.961l8.62,-44.559l4.63,-2.592c9.52333,7.45333%2019.435,13.24467%2029.735,17.374c11.59333,4.64867%2023.24167,6.973%2034.945,6.973c14.54667,0%2025.97633,-3.19933%2034.289,-9.598c8.31267,-6.39867%2012.469,-15.06667%2012.469,-26.004c0,-6.78133%20-1.914,-12.66%20-5.742,-17.636c-3.82867,-4.97667%20-9.51633,-9.051%20-17.063,-12.223zM54.3672,227.698h68.9058c25.81267,0%2045.473,5.004%2058.981,15.012c13.50733,10.008%2020.261,24.58233%2020.261,43.723c0,12.46867%20-1.996,24.82767%20-5.988,37.077c-3.992,12.25%20-9.16,21.98467%20-15.504,29.204c-8.53133,9.95267%20-19.14067,17.14433%20-31.828,21.575c-12.68733,4.42867%20-29.14817,6.643%20-49.3825,6.643h-26.9063l-17.8828,91.711h-43.7778l-3.88732,-3.761zM642.062,227.698h59.063l18.238,240.969l-4.109,3.976h-43.66l-2.297,-60.539h-0.041l-1.756,-40.844l-0.04,-0.002l-3.249,-98.607l-41.151,94.615l-0.06,-0.006l-20.5,47.5h0.005l-25.411,57.883h-43.849l-3.589,-3.474zM94.7266,268.386l-13.7813,71.859h23.4607c15.96867,0%2027.918,-3.69133%2035.848,-11.074c7.92933,-7.38267%2011.894,-18.457%2011.894,-33.223c0,-9.95333%20-2.84367,-17.03533%20-8.531,-21.246c-5.68733,-4.21067%20-15.367,-6.316%20-29.039,-6.316z'%3e%3c/path%3e%3c/svg%3e)
