Mechanical properties	Test Method	Test Result
Tensile modulus	ISO 527-2	13000 Mpa
tensile strength	ISO 527-2	230 Mpa
Tensile strain	ISO 527-2	2.5 %
Flexural modulus	ISO 178	11000 Mpa
bending strength	ISO 178	320 Mpa

Impact resistance	Test Condition	Test Method	Test Result
Suspended wall beam without notch impact strength		ISO 180	40 kJ/m²

Electrical performance	Test Condition	Test Method	Test Result
dielectric constant		ASTM D2520	3.50
Dissipation Factor		ASTM D2520	0.010

injection	Test Condition	Test Method	Test Result
drying temperature			120 °C
drying time			0.50 to 1.5 hr
Temperature at the rear of the barrel			250 to 260 °C
Temperature at the front of the material cylinder			260 to 290 °C
Processing (melt) temperature			280 to 300 °C
Temperature			120 to 140 °C
injection speed			快速

Thermal performance	Test Condition	Test Method	Test Result
Heat distortion temperature		ISO 75-2/A	230 °C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top