Material Properties:Flame retardant
Application Areas:Electrical field｜Electronic field｜Household appliances｜Household appliances｜Automotive External Parts
Color:--
Grade:Injection grade

Technical Data Sheet Compare

thermal performance	Test Condition	Test Method	Test Result
Linear coefficient of thermal expansion	垂直方向	ISO 11359-2	0.7
Heat Deflection Temperature	0.45MPa	ISO 75-1 and ISO 75-2	141 °C
vicat	50℃/h 50N	ISO 308	148 °C
Heat Deflection Temperature	1.80MPa	ISO 75-1 and ISO 75-2	129 °C
TEMPERATURE	电学式，厚度1.47mm	UL 746B	125 °C
	TEMPERATURE	冲击式，厚度1.47mm	UL 746B	115 °C
	TEMPERATURE	TEMPERATURE	非冲击式，厚度1.47mm	UL 746B	125 °C
Linear coefficient of thermal expansion	平行方向	ISO 11359-2	0.7
Combustibility (rate)		UL 94	V-0

processability	Test Condition	Test Method	Test Result
shrinkage rate	平行方向	本公司制订的测定法	0.5-0.7 %
shrinkage rate	shrinkage rate	垂直方向	本公司制订的测定法	0.5-0.7 %

other	Test Condition	Test Method	Test Result
characteristic			要求达-UL-940V-0级的电器电子元件

optical performance	Test Condition	Test Method	Test Result
transmittance		ASTM D1003/ISO 13468	半透明 %

Basic performance	Test Condition	Test Method	Test Result
Water absorption rate	放置23°C水中24小时	ISO 62	0.2 %
density		ISO 1183	1220 kg/m

Electrical performance	Test Condition	Test Method	Test Result
volume resistivity		IEC 60093	>1×10 Ω.cm
Surface Resistivity		IEC 60093	>1×10 Ω
Dielectric loss	1MHz，正切	IEC 60250	90
dielectric constant	100Hz	IEC 60250	3.1
dielectric strength	短时间法	IEC 60243-1	30 KV/m
Dielectric loss	100Hz，正切	IEC 60250	10
dielectric constant	1MHz	IEC 60250	3
arc resistance		IEC 60112	275
Surface Resistivity		ASTM D257/IEC 60093	＞1x10^15 Ω
dielectric constant		ASTM D150/IEC 60250	3.1
dielectric constant	dielectric constant		ASTM D150/IEC 60250	3
volume resistivity		ASTM D257/IEC 60093	＞1x10^13 Ω.cm
Dielectric loss		ASTM D150/IEC 60250	10
Dielectric loss	Dielectric loss		ASTM D150/IEC 60250	90

Physical properties	Test Condition	Test Method	Test Result
transmittance	厚度3mm	ASTM D-1003	半透明 %
density		ASTM D792/ISO 1183	1220
melt mass-flow rate		ASTM D1238/ISO 1133	11 300℃ 1.2KG g/10min
Water absorption rate		ASTM D570/ISO 62	0.2 %

mechanical properties	Test Condition	Test Method	Test Result
flexural modulus	2mm/min	ISO 178	2200 Mpa
bending strength	2mm/min	ISO 178	90 Mpa
Tensile stress	50mm/min	ISO 527-1 and ISO 527-2	62 Mpa
elongation at yield	50mm/min	ISO 527-1 and ISO 527-2	6 %
Impact strength of cantilever beam gap	没缺口	ISO 179	NB KJ/m
Elongation at break	50mm/min	ISO 527-1 and ISO 527-2	>50 %
Tensile modulus	1mm/min	ISO 527-1 and ISO 527-2	2400 Mpa
compressive strength		ASTM D-695	78(800) MPa(Kgf/cm
Impact strength of cantilever beam gap	带缺口	ISO 179	12 KJ/m
Charpy Notched Impact Strength		ASTM D256/ISO 179	12 kg·cm/cm(J/M)ft·lb/in
Tensile modulus		ASTM D638/ISO 527	2400 kg/cm²(MPa)[Lb/in²]
tensile strength		ASTM D638/ISO 527	62 kg/cm²(MPa)[Lb/in²]
elongation		ASTM D638/ISO 527	6 %
flexural modulus		ASTM D790/ISO 178	2200 kg/cm²(MPa)[Lb/in²]
bending strength		ASTM D790/ISO 178	90 kg/cm²(MPa)[Lb/in²]
Elongation at break		ASTM D638/ISO 527	>50 %

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top