Material Properties:Thermal stability｜UV resistance｜High impact resistance｜Impact modification
Application Areas:Casters｜Automotive components｜automotive industry
Color:--
Grade:Injection grade

Technical Data Sheet Compare

thermal performance	Test Condition	Test Method	Test Result
Linear coefficient of thermal expansion	流动	ASTM D696	0.000017 cm/cm/℃
Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	垂直	ASTM D696	0.000068 cm/cm/℃
UL flame retardant rating		UL 94	V-2

Electrical performance	Test Condition	Test Method	Test Result
volume resistivity		ASTM D257	4E+16 Ohm.cm
dielectric strength	3.00mm	ASTM D149	18 kV/mm
dielectric constant	1000Hz	ASTM D150	4.2
dielectric constant	dielectric constant	1E+6Hz	ASTM D150	4.1
Dissipation Factor	1E+6Hz	ASTM D150	0.003
arc resistance		ASTM D495	156 sec
Compared to the Leakage Tracking Index (CTI)		UL 746	V

Physical properties	Test Condition	Test Method	Test Result
Water absorption rate	24hr,23℃	ASTM D570	0.015 %

mechanical properties	Test Condition	Test Method	Test Result
coefficient of friction	VS.ltself-Dynamic	ASTM D1894	0.55
Suspended wall beam without notch impact strength		ASTM D256	520 J/m
Impact strength of cantilever beam gap		ASTM D256	157 J/m
elongation	断裂	ASTM D638	2.3 %
flexural modulus		ASTM D790	11800 MPa
bending strength		ASTM D790	235 MPa

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top