Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PPS 1140T11BK HD9100 JAPAN POLYPLASTIC
DURAFIDE®
Casters,Automotive components,automotive industry
Thermal stability,UV resistance,High impact resistance,Impact modification
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
thermal performance | Test Condition | Test Method | JAPAN POLYPLASTIC/1140T11BK HD9100 |
---|---|---|---|
Linear coefficient of thermal expansion | 垂直 | ASTM D696 | 0.000068 cm/cm/℃ |
Flow | ASTM D696 | 0.000017 cm/cm/℃ | |
UL flame retardant rating | UL 94 | V-2 |
mechanical properties | Test Condition | Test Method | JAPAN POLYPLASTIC/1140T11BK HD9100 |
---|---|---|---|
Bending modulus | ASTM D790 | 11800 MPa | |
bending strength | ASTM D790 | 235 MPa | |
elongation | Break | ASTM D638 | 2.3 % |
Friction coefficient | VS.ltself-Dynamic | ASTM D1894 | 0.55 |
Impact strength of cantilever beam gap | ASTM D256 | 157 J/m | |
Suspended wall beam without notch impact strength | ASTM D256 | 520 J/m |
Electrical performance | Test Condition | Test Method | JAPAN POLYPLASTIC/1140T11BK HD9100 |
---|---|---|---|
Arc resistance | ASTM D495 | 156 sec | |
Compared to the anti leakage trace index | UL 746 | V | |
Dielectric constant | 1000Hz | ASTM D150 | 4.2 |
1E+6Hz | ASTM D150 | 4.1 | |
Dielectric strength | 3.00mm | ASTM D149 | 18 kV/mm |
Dissipation factor | 1E+6Hz | ASTM D150 | 0.003 |
Volume resistivity | ASTM D257 | 4E+16 Ohm.cm |
Physical properties | Test Condition | Test Method | JAPAN POLYPLASTIC/1140T11BK HD9100 |
---|---|---|---|
Water absorption rate | 24hr,23℃ | ASTM D570 | 0.015 % |