Material Properties:Creep resistance｜Fatigue resistance｜high strength｜High rigidity｜Filler: Glass fiber reinforced material｜Enhanced strength and rigidity｜Glass fiber content is 43%｜43% filler by weight
Application Areas:Automotive sector｜component｜Engine hood parts｜Electronic field｜Electrical field｜Application in the automotive field｜Parts under the hood of a car｜Electrical/Electronic Applications｜Mechanical and electrical components｜Like a micro electric motor｜Automotive parts｜Like radiator water tank｜Gear lever
Color:--
Grade:Injection grade

Technical Data Sheet Compare

hardness	Test Condition	Test Method	Test Result
Rockwell hardness	M计秤	ASTM D785	96
	Rockwell hardness	R计秤	ASTM D785	118
		Rockwell hardness	M计秤	ISO 2039-2	96
		Rockwell hardness	Rockwell hardness	R计秤	ISO 2039-2	118

thermal performance	Test Condition	Test Method	Test Result
UL flame retardant rating	干	UL 94	HB
thermal conductivity	干		0.4 W/(m.K)
Heat Deflection Temperature	0.46MPa,干	ASTM D-648	260 °C
Linear coefficient of thermal expansion	干	ASTM D-696	3 ×10-5/K
Heat Deflection Temperature	1.82MPa,干	ASTM D-648	250 °C
Heat Deflection Temperature	Heat Deflection Temperature	1.8MPa,未退火	ISO 75-2/A	255 °C
Linear coefficient of thermal expansion	MD	ASTM D696	3E-05 cm/cm/°C
thermal conductivity			0.40 W/m/K
Heat Deflection Temperature	0.45MPa,未退火	ASTM D648	260 °C
	Heat Deflection Temperature	0.45MPa,未退火	ISO 75-2/B	260 °C
	Heat Deflection Temperature	Heat Deflection Temperature	1.8MPa,未退火	ASTM D648	250 °C

flammability	Test Condition	Test Method	Test Result
UL flame retardant rating	0.75mm	UL 94	HB

Basic performance	Test Condition	Test Method	Test Result
Water absorption rate	湿		1.4 %

Impact resistance	Test Condition	Test Method	Test Result
Impact strength of simply supported beam without notch		ISO 179	84 kJ/m²

Physical properties	Test Condition	Test Method	Test Result
Wear factor	湿	ASTM D-1044	19 ×10-6kg/1000times
shrinkage rate	干	旭化成方法	0.3/0.7 %
	shrinkage rate	TD	内部方法	0.70 %
		shrinkage rate	MD	内部方法	0.30 %
		shrinkage rate	shrinkage rate	吸水率(饱和,23°C)	内部方法	-- %
Water absorption rate	平衡,23°C,50%RH	ISO 62	-- %

Electrical performance	Test Condition	Test Method	Test Result
Surface Resistivity		ASTM D257	1E+15 ohms
Surface Resistivity	Surface Resistivity		IEC 60093	1E+15 ohms
volume resistivity		ASTM D257	1E+15 ohms·cm
volume resistivity	volume resistivity	23°C	IEC 60093	1E+15 ohms·cm
dielectric strength		ASTM D149	30 KV/mm
dielectric strength	dielectric strength		IEC 60243-1	30 KV/mm
Compared to the Leakage Tracking Index (CTI)	3.00mm	IEC 60112	PLC 0

mechanical properties	Test Condition	Test Method	Test Result
Elongation at break	干(湿)	ASTM D-638	3(4) %
flexural coefficient	干(湿)	ASTM D-790	11.8(8.3) GPa
Rockwell hardness	干(湿)	ASTM D-785	118(-) R scale
bending strength	干(湿)	ASTM D-790	314(235) Mpa
tensile strength	干(湿)	ASTM D-638	196(157) Mpa
Rockwell hardness	干(湿)	ASTM D-785	96(80) M Scale
Impact strength of cantilever beam gap	干(湿)	ASTM D-256	127(206) J/m
Tensile modulus	23°C	ISO 527-2	12700 Mpa
tensile strength		ASTM D638	196 Mpa
tensile strength	tensile strength	断裂,23°C	ISO 527-2	207 Mpa
elongation	断裂	ASTM D638	3.0 %
Tensile strain	断裂,23°C	ISO 527-2	3.0 %
flexural modulus		ASTM D790	11800 Mpa
flexural modulus	flexural modulus	23°C	ISO 178	11700 Mpa
bending strength		ASTM D790	314 Mpa
bending strength	bending strength	23°C	ISO 178	303 Mpa
Taber abraser	1000Cycles	ASTM D1044	-- mg

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top