Material Properties:Filler: Glass beads｜50% filler by weight
Application Areas:furniture｜Shell｜Application in the automotive field｜Electrical/Electronic Applications
Color:--
Grade:Injection grade

Technical Data Sheet Compare

physical property	Test Condition	Test Method	Test Result
Shrinkage rate		ISO 294-4	1.1 %
Shrinkage rate	Shrinkage rate		ISO 294-4	1.0 %
Water absorption rate		ISO 62	4.7 %
moisture absorption		ISO 1110	1.5 %

flammability	Test Method	Test Result
burning rate	FMVSS302	<100 mm/min
UL flame retardant rating	UL 94	HB
Burning wire flammability index	IEC 60695-2-12	650 °C

Supplementary Information	Test Condition	Test Method	Test Result
ReinforcementContent		ISO 1172	50 %

Mechanical properties	Test Method	Test Result
Tensile modulus	ISO 527-2/1	5700 Mpa
tensile strength	ISO 527-2/5	75.0 Mpa
Tensile strain	ISO 527-2/5	4.0 %
Flexural modulus	ISO 178	5200 Mpa
bending strength	ISO 178	135 Mpa

Impact resistance	Test Condition	Test Method	Test Result
Impact strength of simply supported beam without notch		ISO 179/1eU	32 kJ/m²
Impact strength of simply supported beam without notch	Impact strength of simply supported beam without notch		ISO 179/1eU	42 kJ/m²

Electrical performance	Test Method	Test Result
Surface Resistivity	IEC 60093	1E+13 ohms
Volume resistivity	IEC 60093	1E+15 ohms·cm
Compared to the Leakage Tracking Index (CTI)	IEC 60112	V

Thermal performance	Test Condition	Test Method	Test Result
Heat distortion temperature		ISO 75-2/B	188 °C
Heat distortion temperature	Heat distortion temperature		ISO 75-2/A	75.0 °C
melting temperature		DIN EN11357-1	225 °C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top