Material Properties:Hydrolysis resistance｜Chemical resistance｜Filler: Glass fiber reinforced material
Application Areas:Home appliance components｜Industrial components｜Electrical appliances｜Valves/valve components｜Pipeline components｜Microwave cooker｜Home appliance components｜Electrical components｜Food service sector｜Electrical/Electronic Applications｜Industrial components｜Vehicle electronics｜Pipeline system
Color:--
Grade:Injection grade

Technical Data Sheet Compare

physical property	Test Condition	Test Method	Test Result
melt mass-flow rate		ASTM D1238	6.5 g/10min
Shrinkage rate		ASTM D955	0.20 %

flammability	Test Condition	Test Method	Test Result
UL flame retardant rating		UL 94	V-0

Mechanical properties	Test Method	Test Result
Tensile modulus	ASTM D638	8690 Mpa
tensile strength	ASTM D638	108 Mpa
elongation	ASTM D638	2.0 %
Flexural modulus	ASTM D790	7580 Mpa
bending strength	ASTM D790	154 Mpa

Impact resistance	Test Condition	Test Method	Test Result
Impact strength of cantilever beam gap		ASTM D1822	113 kJ/m²

Electrical performance	Test Condition	Test Method	Test Result
Volume resistivity		ASTM D257	2E+16 ohms·cm
dielectric strength		ASTM D149	19 KV/mm
dielectric constant		ASTM D150	3.48
dielectric constant	dielectric constant		ASTM D150	3.47
Dissipation Factor		ASTM D150	7E-04
Dissipation Factor	Dissipation Factor		ASTM D150	5E-03

Thermal performance	Test Condition	Test Method	Test Result
Heat distortion temperature		ASTM D648	181 °C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top