Material Properties:high strength｜High temperature resistance｜High toughness｜Flame retardant｜enhance
Application Areas:Household appliances｜Household appliances｜Fitness equipment｜Automotive sector｜Bottle cap
Color:--
Grade:Injection grade

Material Certification

SGS

Technical Data Sheet Compare

hardness	Test Condition	Test Method	Test Result
Rockwell hardness	M级	ISO 2039-2	105

thermal performance	Test Condition	Test Method	Test Result
Combustibility (rate)		UL 94	V-0
Linear coefficient of thermal expansion		ASTM D696/ISO 11359	- mm/mm.℃
Heat Deflection Temperature	1.8MPa,未退火	ISO 75-2/A	260 °C
Linear coefficient of thermal expansion	MD	内部方法	2E-05 cm/cm/°C
Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	TD	内部方法	4E-05 cm/cm/°C
Heat Deflection Temperature	1.8MPa	ISO 75-1	260 °C
Linear coefficient of thermal expansion	流动方向	ISO 11359-2	2 ×10-5/℃
Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	垂直方向		4 ×10-5/℃

flammability	Test Condition	Test Method	Test Result
UL flame retardant rating		UL 94	V-0

Basic performance	Test Condition	Test Method	Test Result
density		ISO 1183	1.57 g/cm³
melt viscosity	310℃,1000/sec	ISO 11443	350 Pa·s
Water absorption rate	23℃,水中24小时	ISO 62	0.01 %

Supplementary Information	Test Condition	Test Method	Test Result
ColorNumber			HF2000/HD9050

Electrical performance	Test Condition	Test Method	Test Result
volume resistivity		ASTM D257/IEC 60093	3.0 x 10^16 Ω.cm
volume resistivity	volume resistivity		IEC 60093	3E+16 ohms·cm
dielectric strength	3.00mm	IEC 60243-1	16 KV/mm
relative permittivity	1kHz	IEC 60250	4.00
relative permittivity	relative permittivity	1MHz	IEC 60250	4.00
Dissipation Factor	1kHz	IEC 60250	1E-03
	Dissipation Factor	1MHz	IEC 60250	2E-03
	Dissipation Factor	Dissipation Factor	耐电弧性	IEC 60250	124 sec
Compared to the Leakage Tracking Index (CTI)		IEC 60112	PLC 4
volume resistivity		IEC 60093	3×1016 Ω·cm
Dielectric loss	3mmt	IEC 60243-1	16 KV/mm
Surface Resistivity		IEC 60093	2×1017 Ω
Leakage Tracking Index (CTI)		IEC 60112	150 V

Physical properties	Test Condition	Test Method	Test Result
density		ASTM D792/ISO 1183	1.57
Water absorption rate		ASTM D570/ISO 62	0.01 %
shrinkage rate	流动方向，80℃×2mmt		0.3 %
shrinkage rate	shrinkage rate	垂直方向，80℃×2mmt		0.6 %
melt viscosity	310°C,1000sec^-1	ISO 11443	350000 mPa·s
Water absorption rate	23°C,24hr	ISO 62	0.030 %

mechanical properties	Test Condition	Test Method	Test Result
tensile strength		ASTM D638/ISO 527	170 kg/cm²(MPa)[Lb/in²]
flexural modulus		ASTM D790/ISO 178	10000 kg/cm²(MPa)[Lb/in²]
bending strength		ASTM D790/ISO 178	245 kg/cm²(MPa)[Lb/in²]
Elongation at break		ASTM D638/ISO 527	2 %
tensile strength		ISO 527-1	170 Mpa
fracture strain		ISO 527-1	2 %
tensile strength		ISO 527-2	170 Mpa
Tensile strain	断裂	ISO 527-2	2.0 %
flexural modulus		ISO 178	10000 Mpa
bending strength		ISO 178	245 Mpa
bending strength	bending strength		ISO 178	245 Mpa
flexural modulus		ISO 178	10000 Mpa
Charpy Notched Impact Strength		ISO 179/1eA	10.0 kJ/m²

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top