Material Properties:High mobility｜High impact resistance｜ High flow｜High impact｜ High flow｜High impact
Application Areas:Electrical field｜Electronic field｜Automotive interior parts
Color:--
Grade:Injection grade

Technical Data Sheet

mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Rockwell hardness		ASTM D-785	-	R
Impact strength of cantilever beam gap	23℃	ASTM D-256	640	J/m
Elongation at Break	Break点	ASTM D-638	150	%
bending strength		ASTM D-790	86	Mpa
tensile strength	屈伏点	ASTM D-638	56	Mpa
Bending modulus		ASTM D-790	2343	Mpa
Tensile modulus		ASTM D-638	2205	Mpa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Vicat softening temperature		ASTM D-1525	-	°C
Hot deformation temperature	0.45Mpa	ASTM D-648	123	°C
Long term use temperature	无冲击	UL -746B	60	°C
UL flame retardant rating		UL -94	1.5	mm
Linear coefficient of thermal expansion		E831	7.2E-05	1/℃
Long term use temperature	含冲击	UL -746B	60	°C
Hot deformation temperature	1.8Mpa	ASTM D-648	107	°C
UL flame retardant rating		UL -94	HB
Physical properties	Test Condition	Test Method	Test Result	Test Unit
density		ASTM D-792	1.14
Shrinkage rate	3.2mm	ASTM D-955	5-7	E-3
Water absorption rate		ASTM D-570	0.1	%
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Volume resistivity		ASTM D-257	-	ohm-cm
Dissipation factor	1MHz	ASTM D-150	-
Surface resistivity		ASTM D-257	-	ohm-cm
Dielectric constant	1MHz	ASTM D-150	-

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top