Material Comparison
Add Comparison Model
Select Products for Comparison (1/4)
Highlight Differences
Hide Same
Product Name / Manufacturer / Model
Grade
Reference Price
| thermal performance | Test Condition | Test Method | SABIC INNOVATIVE NANSHA/C1110-100 |
|---|---|---|---|
| Long term use temperature | 含冲击 | UL -746B | 60 °C |
| Linear coefficient of thermal expansion | E831 | 7.2E-05 1/℃ | |
| Hot deformation temperature | 0.45Mpa | ASTM D-648 | 123 °C |
| 1.8Mpa | ASTM D-648 | 107 °C | |
| Vicat softening temperature | ASTM D-1525 | - °C | |
| UL flame retardant rating | UL -94 | HB mm | |
| Long term use temperature | 无冲击 | UL -746B | 60 °C |
| mechanical properties | Test Condition | Test Method | SABIC INNOVATIVE NANSHA/C1110-100 |
| Rockwell hardness | ASTM D-785 | - R | |
| Impact strength of cantilever beam gap | 23℃ | ASTM D-256 | 640 J/m |
| bending strength | ASTM D-790 | 86 Mpa | |
| tensile strength | 屈伏点 | ASTM D-638 | 56 Mpa |
| Bending modulus | ASTM D-790 | 2343 Mpa | |
| Elongation at Break | Break点 | ASTM D-638 | 150 % |
| Tensile modulus | ASTM D-638 | 2205 Mpa | |
| Physical properties | Test Condition | Test Method | SABIC INNOVATIVE NANSHA/C1110-100 |
| Water absorption rate | ASTM D-570 | 0.1 % | |
| density | ASTM D-792 | 1.14 | |
| Shrinkage rate | 3.2mm | ASTM D-955 | 5-7 E-3 |
| Electrical performance | Test Condition | Test Method | SABIC INNOVATIVE NANSHA/C1110-100 |
| Dissipation factor | 1MHz | ASTM D-150 | - |
| Volume resistivity | ASTM D-257 | - ohm-cm | |
| Dielectric constant | 1MHz | ASTM D-150 | - |
| Surface resistivity | ASTM D-257 | - ohm-cm |
