Technical Data Sheet Compareimpact performance Test Condition Test Method Test Result Charpy Notched Impact Strength 23°C ISO 179 16 kJ/m²
machinability Test Condition Test Method Test Result Mold temperature 40-70 °C
flammability Test Condition Test Method Test Result UL flame retardant rating 1.5mm UL 94 V-0 UL flame retardant rating 3.0mm UL 94 5VA
Basic Performance Test Condition Test Method Test Result density ASTM D-792 1.08 Shrinkage rate ASTM D-955 0.50-0.70 % Water absorption rate ASTM D-570 0.10 %
mechanical properties Test Condition Test Method Test Result tensile strength ASTM D-638 39 Mpa Elongation at Break ASTM D-638 40 % Bending modulus ASTM D-790 2350 Mpa bending strength ASTM D-790 59 Mpa UL flame retardant rating UL 94 V-0 Elongation at Break ASTM D638/ISO 527 40 % tensile strength ASTM D638/ISO 527 36 kg/cm²(MPa)[Lb/in²] Rockwell hardness ASTM D785 R110 Bending modulus ASTM D790/ISO 178 2250 kg/cm²(MPa)[Lb/in²] bending strength ASTM D790/ISO 178 59 kg/cm²(MPa)[Lb/in²] tensile strength Yield,23°C ISO 527-2 37.0 Mpa Nominal tensile fracture strain 23°C ISO 527-2 30 % Bending modulus 23°C ISO 178 2370 Mpa bending strength 23°C ISO 178 66.0 Mpa
thermal performance Test Condition Test Method Test Result Combustibility (rate) UL 94 V-0 Hot deformation temperature HDT ASTM D648/ISO 75 85 ℃(℉) Hot deformation temperature 1.8MPa,Unannealed ASTM D648 85.0 °C Hot deformation temperature 1.8MPa,Unannealed ISO 75-2/A 78.0 °C Linear coefficient of thermal expansion MD:-30to65°C ISO 11359-2 8E-05 cm/cm/°C
Physical properties Test Condition Test Method Test Result density ASTM D792/ISO 1183 1.08 Water absorption rate ASTM D570/ISO 62 0.1 % Shrinkage rate 2.00mm Internal Method 0.50-0.70 % Water absorption rate 23°C,24hr ISO 62 0.10 %
Electrical performance Test Condition Test Method Test Result Surface resistivity IEC 60093 1E+16 ohms Volume resistivity 23°C IEC 60093 1E+16 ohms·cm Dielectric strength 2.00mm IEC 60243-1 29 KV/mm Dielectric constant 100Hz IEC 60250 2.90 Dielectric constant 1MHz IEC 60250 2.90 Dissipation factor 100Hz IEC 60250 3E-03 Dissipation factor 1MHz IEC 60250 4E-03
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.