PPO NORYL PPX™ PPX7200U-BK1A363 SABIC INNOVATIVE US
164
- Unit Price:US$ 4,743 /MT
- Packaging Specification:25 KG/PKG
- Packaging Material:Paper bag
- Supply Quantity:30MT
- Delivery Terms:FOB
- Port of Loading :China Main Port
- Accepted Payment Methods:T/T
- Shipping:Negotiate supplier for shipping details
Supplier Information
ASIA PLASTIC EXCHANGE LIMITED
+86 755 ********View
serv********View
For more details, please contact the supplier!
Material Description
- Material Properties:Dimensional stability｜High impact｜High rigidity
- Application Areas:Printer components｜Cold water pipe application｜Water heater
- Color:--
- Grade:Injection grade
Technical Data Sheet
Compare
| thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat Deflection Temperature | 0.45 MPa, 未退火, 3.20 mm | ASTM D648 | 110 °C |
| 1.8 MPa, 未退火, 3.20 mm | ASTM D648 | 71.0 °C | |
| vicat | -- | ASTM D152510 | 146 °C |
| -- | ISO 306/B50 | 103 °C | |
| -- | ISO 306/B120 | 107 °C | |
| Linear coefficient of thermal expansion | 流动 : -40 到 40°C | ASTM E831 | 9.9E-5 cm/cm/°C |
| 横向 : -40 到 40°C | ASTM E831 | 1.1E-4 cm/cm/°C |
| Physical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| melt mass-flow rate | 260°C/5.0 kg | ASTM D1238 | 16 g/10 min |
| Melt volume flow rate | 260°C/5.0 kg | ISO 1133 | 18.0 cm3/10min |
| shrinkage rate | 流动 2 | 内部方法 | 0.060 - 0.080 % |
| 流动 : 3.20 mm | 内部方法 | 0.60 - 0.80 % | |
| 横向流动 : 3.20 mm | 内部方法 | 0.60 - 0.80 % |
| injection | Test Condition | Test Method | Test Result |
|---|---|---|---|
| drying temperature | 60 to 65 °C | ||
| drying time | 2.0 to 4.0 hr | ||
| Suggested maximum moisture content | 0.020 % | ||
| Suggested injection volume | 30 to 70 % | ||
| Temperature at the rear of the barrel | 225 to 275 °C | ||
| Temperature in the middle of the barrel | 240 to 280 °C | ||
| Temperature at the front of the material cylinder | 250 to 290 °C | ||
| Spray nozzle temperature | 260 to 290 °C | ||
| Processing (melt) temperature | 260 to 290 °C | ||
| mold temperature | 30 to 50 °C | ||
| Back pressure | 0.300 to 0.700 Mpa | ||
| screw speed | 20 to 100 rpm | ||
| Exhaust hole depth | 0.038 to 0.051 mm |
| mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| tensile modulus | --3 | ASTM D638 | 1240 Mpa |
| -- | ISO 527-2/1 | 1670 Mpa | |
| tensile strength | 屈服4 | ASTM D638 | 33.0 Mpa |
| 屈服 | ISO 527-2/50 | 34.0 Mpa | |
| 断裂4 | ASTM D638 | 27.0 Mpa | |
| 断裂 | ISO 527-2/50 | 28.0 Mpa | |
| elongation | 屈服4 | ASTM D638 | 10 % |
| 屈服 | ISO 527-2/50 | 8.2 % | |
| 断裂4 | ASTM D638 | 130 % | |
| 断裂 | ISO 527-2/50 | 120 % | |
| flexural modulus | 50.0 mm 跨距5 | ASTM D790 | 1440 Mpa |
| --6 | ISO 178 | 1600 Mpa | |
| bending strength | --6,7 | ISO 178 | 48.0 Mpa |
| 屈服, 50.0 mm 跨距5 | ASTM D790 | 48.0 Mpa |
| impact performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Charpy Notched Impact Strength | -30°C | ISO 179/1eA | 6.0 kJ/m² |
| 23°C | ISO 179/1eA | 12 kJ/m² | |
| Impact strength of simply supported beam without notch | -30°C | ISO 179/1eU | 80 kJ/m² |
| 23°C | ISO 179/1eU | 无断裂 | |
| Suspended wall beam without notch impact strength | 23°C | ASTM D4812 | 1400 J/m |
| -30°C9 | ISO 180/1U | 无断裂 | |
| 23°C9 | ISO 180/1U | 无断裂 | |
| Dart impact | 23°C, Total Energy | ASTM D3763 | 36.0 J |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top