PEI ULTEM™ Resin AUT200-GY8D115 SABIC INNOVATIVE SHANGHAI
281
- Unit Price:US$ 16,632 /MT
- Packaging Specification:25 KG/PKG
- Packaging Material:Paper bag
- Supply Quantity:10MT
- Delivery Terms:FOB
- Port of Loading :China Main Port
- Accepted Payment Methods:T/T
- Shipping:Negotiate supplier for shipping details
Supplier Information
ASIA PLASTIC EXCHANGE LIMITED
+86 755 ********View
serv********View
For more details, please contact the supplier!
Material Description
- Material Properties:--
- Application Areas:--
- Color:--
- Grade:Injection grade
Technical Data Sheet
Compare
| thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat Deflection Temperature | 0.45 MPa, 未退火, 3.20 mm | ASTM D648 | 205 °C |
| 1.8 MPa, 未退火, 3.20 mm | ASTM D648 | 197 °C | |
| 1.8 MPa, 未退火, 6.40 mm | ASTM D648 | 199 °C | |
| 1.8 MPa, 未退火, 4.00 mm, 100 mm 跨距8 | ISO 75-2/Ae | 190 °C | |
| 1.8 MPa, 未退火, 4.00 mm, 64.0 mm 跨距7 | ISO 75-2/Af | 193 °C | |
| vicat | -- | ASTM D15259 | 219 °C |
| -- | ISO 306/B50 | 211 °C | |
| -- | ISO 306/B120 | 212 °C | |
| Linear coefficient of thermal expansion | 流动 : -40 到 150°C | ASTM E831 | 5.5E-5 cm/cm/°C |
| 流动 : 23 到 150°C | ISO 11359-2 | 5.0E-5 cm/cm/°C | |
| 横向 : -40 到 150°C | ASTM E831 | 5.5E-5 cm/cm/°C | |
| 横向 : 23 到 150°C | ISO 11359-2 | 5.0E-5 cm/cm/°C | |
| Metallic haze | 起始 | 内部方法 | 204 °C |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Suspended wall beam without notch impact strength | 23°C | ASTM D4812 | 1300 J/m |
| -30°C7 | ISO 180/1U | 无断裂 | |
| 23°C7 | ISO 180/1U | 无断裂 | |
| Dart impact | 23°C, Total Energy | ASTM D3763 | 33.0 J |
| Physical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| melt mass-flow rate | 337°C/6.7 kg | ASTM D1238 | 18 g/10 min |
| Melt volume flow rate | 360°C/5.0 kg | ISO 1133 | 25.0 cm3/10min |
| shrinkage rate | 3.20 mm，Flow | 内部方法 | 0.50 - 0.70 % |
| Water absorption rate | 饱和, 23°C | ISO 62 | 1.3 % |
| 平衡, 23°C, 50% RH | ISO 62 | 0.70 % |
| injection | Test Condition | Test Method | Test Result |
|---|---|---|---|
| drying temperature | 150 °C | ||
| drying time | 4.0 to 6.0 hr | ||
| Suggested maximum moisture content | 0.020 % | ||
| Suggested injection volume | 40 to 60 % | ||
| Temperature at the rear of the barrel | 330 to 400 °C | ||
| Temperature in the middle of the barrel | 340 to 400 °C | ||
| Temperature at the front of the material cylinder | 345 to 400 °C | ||
| Spray nozzle temperature | 345 to 400 °C | ||
| Processing (melt) temperature | 350 to 400 °C | ||
| mold temperature | 135 to 165 °C | ||
| Back pressure | 0.300 to 0.700 Mpa | ||
| screw speed | 40 to 70 rpm | ||
| Exhaust hole depth | 0.025 to 0.076 mm |
| mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile modulus | --1 | ASTM D638 | 3590 Mpa |
| -- | ISO 527-2/1 | 3200 Mpa | |
| tensile strength | 屈服2 | ASTM D638 | 110 Mpa |
| 屈服 | ISO 527-2/5 | 105 Mpa | |
| 断裂2 | ASTM D638 | 105 Mpa | |
| 断裂 | ISO 527-2/5 | 85.0 Mpa | |
| elongation | 屈服2 | ASTM D638 | 7.0 % |
| 屈服 | ISO 527-2/5 | 6.0 % | |
| 断裂2 | ASTM D638 | 60 % | |
| 断裂 | ISO 527-2/5 | 60 % | |
| flexural modulus | 50.0 mm 跨距3 | ASTM D790 | 3520 Mpa |
| --4 | ISO 178 | 3300 Mpa | |
| bending strength | --4,5 | ISO 178 | 160 Mpa |
| 屈服, 50.0 mm 跨距3 | ASTM D790 | 165 Mpa |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top