Material Properties:Flame retardant|Thermal stability
Application Areas:Electrical components|switch|Laptop case|Electronic field|Electrical field
Color:--
Grade:Injection grade
Material Certification
UL
Technical Data Sheet
Other performance
Test Condition
Test Method
Test Result
Extreme Oxygen Index
干
ASTM D-2863
37 %
impact performance
Test Condition
Test Method
Test Result
Impact strength of simply supported beam without notch
ISO 179
64 kJ/m²
flammability
Test Condition
Test Method
Test Result
UL flame retardant rating
0.75mm
UL 94
V-0
Burning wire flammability index
3.0mm
IEC 60695-2-12
960 °C
Extreme Oxygen Index
ASTM D2863
37 %
Basic Performance
Test Condition
Test Method
Test Result
Water absorption rate
湿
0.9 %
mechanical properties
Test Condition
Test Method
Test Result
bending strength
干(湿)
ASTM D-790
216(177) Mpa
tensile strength
干(湿)
ASTM D-638
153(123) Mpa
Rockwell hardness
干(湿)
ASTM D-785
95(55) M Scale
Impact strength of cantilever beam gap
干(湿)
ASTM D-256
63(72) J/m
Elongation at Break
干(湿)
ASTM D-638
2.5(2.7) %
flexural coefficient
干(湿)
ASTM D-790
7.6(5.9) GPa
bending strength
23°C
ISO 178
208 Mpa
Taber abraser
1000Cycles
ASTM D1044
-- mg
Tensile modulus
23°C
ISO 527-2
9100 Mpa
tensile strength
ASTM D638
153 Mpa
tensile strength
Break,23°C
ISO 527-2
136 Mpa
elongation
Break
ASTM D638
2.5 %
Tensile strain
Break,23°C
ISO 527-2
2.5 %
Bending modulus
ASTM D790
7600 Mpa
Bending modulus
23°C
ISO 178
8000 Mpa
bending strength
ASTM D790
216 Mpa
thermal performance
Test Condition
Test Method
Test Result
Hot deformation temperature
1.82MPa,干
ASTM D-648
248 °C
UL flame retardant rating
干
UL 94
V-0
Hot deformation temperature
0.46MPa,干
ASTM D-648
255 °C
Linear coefficient of thermal expansion
干
ASTM D-696
3 ×10-5/K
Hot deformation temperature
0.45MPa,Unannealed
ASTM D648
255 °C
Hot deformation temperature
0.45MPa,Unannealed
ISO 75-2/B
256 °C
Hot deformation temperature
1.8MPa,Unannealed
ISO 75-2/A
240 °C
Linear coefficient of thermal expansion
MD
ASTM D696
3E-05 cm/cm/°C
Hot deformation temperature
1.8MPa,Unannealed
ASTM D648
248 °C
Physical properties
Test Condition
Test Method
Test Result
Shrinkage rate
干
旭化成方法
0.4-0.9 %
Wear factor
湿
ASTM D-1044
24 ×10-6kg/1000times
Shrinkage rate
吸水率(Saturation,23°C)
Internal Method
-- %
Water absorption rate
Equilibrium,23°C,50%RH
ISO 62
-- %
Shrinkage rate
TD
Internal Method
0.90 %
Shrinkage rate
MD
Internal Method
0.40 %
Electrical performance
Test Condition
Test Method
Test Result
Surface resistivity
ASTM D257
1E+14 ohms
Surface resistivity
IEC 60093
1E+14 ohms
Volume resistivity
ASTM D257
1E+15 ohms·cm
Volume resistivity
23°C
IEC 60093
1E+15 ohms·cm
Dielectric strength
ASTM D149
28 KV/mm
Dielectric strength
IEC 60243-1
28 KV/mm
Compared to the anti leakage trace index
3.00mm
IEC 60112
PLC 2
hardness
Test Condition
Test Method
Test Result
Rockwell hardness
M-Scale
ASTM D785
95
Rockwell hardness
M-Scale
ISO 2039-2
95
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.