Material Properties:--
Application Areas:Trimming machine｜Food mixer motor stator and commutator｜Electric fan｜Laptop case｜Spool｜Switches｜ etc
Color:--
Grade:Injection grade

Technical Data Sheet Compare

thermal performance	Test Condition	Test Method	Test Result
vicat	维卡软化温度，等级 B/50	ASTM D 1525	200 °C
Heat Deflection Temperature	0.45 MPa, 3.2 mm, unannealed （未退火）	ASTM D 648	212 °C
	Heat Deflection Temperature	1.82 MPa, 3.2mm, unannealed （未退火）	ASTM D 648	200 °C
		Heat Deflection Temperature	0.45 MPa, 6.4 mm， unannealed （未退火）	ASTM D 648	215 °C
		Heat Deflection Temperature	Heat Deflection Temperature	1.82 MPa, 6.4 mm, unannealed （未退火）	ASTM D 648	204 °C
Linear coefficient of thermal expansion	-40℃ to 4O℃,flow （流动）	ASTM E 831	0.0000252 1/℃
Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	60℃ to 138℃, flow （流动）	ASTM E 831	0.0000252 1/℃
Relative Temp Index. Elec	相对热指数，电性能	UL 746B	130 °C
Relative Temp Index, Meeh w/impact	相对热指数，机械冲击性能	UL 746B	130 °C
Relative Temp Index, Meeh w/o impact	相对热指数，非机械冲击性能	UL 746B	140 °C
Linear coefficient of thermal expansion	-40℃-4O℃, 流动	ASTM E 831	0.0000252 1/℃
Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	60℃-138℃, 流动	ASTM E 831	0.0000252 1/℃
Heat Deflection Temperature	0.45 MPa, 3.2 mm, 未退火	ASTM D 648	212 °C
	Heat Deflection Temperature	1.82 MPa, 3.2mm, 未退火	ASTM D 648	200 °C
		Heat Deflection Temperature	0.45 MPa, 6.4 mm，未退火	ASTM D 648	215 °C
		Heat Deflection Temperature	Heat Deflection Temperature	1.82 MPa, 6.4 mm, 未退火	ASTM D 648	204 °C

Physical property type	Test Condition	Test Method	Test Result
Test project	测试条件	测试方法	测试结果测试单位

Physical properties	Test Condition	Test Method	Test Result
density	比重	ASTM D 792	1.61 —
Specific Volume		ASTM D 792	0.62 cm³/g
Water absorption rate	24 hours	ASTM D 570	0.06 %
shrinkage rate	flow （流动），3.2 mm	SABIC method	0.5 - 0.7 %
	shrinkage rate	flow （流动）,1.5-3.2 mm	SABIC method	0.3 - 0.5 %
		shrinkage rate	flow （流动），3.2-4.6 mm	SABIC method	0.5 - 0.8 %
			shrinkage rate	xflow （横向）,1.5-3.2 mm	SABIC method	0.4 - 0.6 %
			shrinkage rate	shrinkage rate	xflow （横向），3.2-4.6mm	SABIC method	0.6-1 %
specific volume		ASTM D 792	0.62 cm³/g
density		ASTM D 792	1.61 —
shrinkage rate	横向，3.2-4.6mm	SABIC method	0.6-1 %
	shrinkage rate	流动, 1.5-3.2 mm	SABIC method	0.3 - 0.5 %
		shrinkage rate	流动，3.2-4.6 mm	SABIC method	0.5 - 0.8 %
			shrinkage rate	横向 ,1.5-3.2 mm	SABIC method	0.4 - 0.6 %
			shrinkage rate	shrinkage rate	流动，3.2 mm	SABIC method	0.5 - 0.7 %
Water absorption rate	24 hours	ASTM D 570	0.06 %

mechanical properties	Test Condition	Test Method	Test Result
Tensile stress	抗张程度，屈服，类型L，5 mm/min	ASTM D 638	95 Mpa
	Tensile stress	抗张程度，断裂，类型L, 5 mm/min，屈服	ASTM D 638	95 Mpa
		Tensile stress	拉伸伸长,屈服,类型L, 5 mm/min	ASTM D 638	1.2 %
		Tensile stress	Tensile stress	拉伸伸长,断裂，类型L, 5 mm/min，屈服	ASTM D 638	1.2 %
Tensile modulus	拉伸模量,5 mm/min	ASTM D 638	11500 Mpa
Flexural Stress, brk	弯曲强度，断裂,1.3 mm/min, 50 mm span	ASTM D 790	186 Mpa
flexural modulus	挠曲模量，1.3 mm/min, 50 mm span	ASTM D 790	9400 Mpa
Rockwell hardness	洛氏硬度 R	ASTM D 785	119 -
flexural modulus	1.3 mm/min, 50 mm span	ASTM D 790	9400 Mpa
bending strength	断裂,1.3 mm/min, 50 mm span	ASTM D 790	186 Mpa
Rockwell hardness	R	ASTM D 785	119 -
Tensile modulus	5 mm/min	ASTM D 638	11500 Mpa
Tensile strength	屈服，类型L，5 mm/min	ASTM D 638	95 Mpa
Tensile strength	Tensile strength	断裂，类型L, 5 mm/min	ASTM D 638	95 Mpa
elongation	屈服,类型L, 5 mm/min	ASTM D 638	1.2 %
elongation	elongation	断裂，类型L, 5 mm/min	ASTM D 638	1.2 %

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top