thermal performance	Test Condition	Test Method	Test Result
vicat	50℃/小时，50n重	ASTM D-1525	151 °C
Heat Deflection Temperature	退火@0.45MPa	ASTM D-648	137 °C
shrinkage rate		ASTM D-696	65×10 mm/mm/℃
Heat Deflection Temperature	未退火@1.82MPa	ASTM D-648	127 °C
Ball indentation temperature		IEC 598-1	＞125 °C

Basic performance	Test Condition	Test Method	Test Result
melt mass-flow rate	300℃/1.2kg	ASTM D-1238	10 g/10min

Other performance	Test Condition	Test Method	Test Result
Glow wire combustion index (GWFI)	2.0mm	IEC 695-2-1	960 °C
Limiting Oxygen Index (LOI)		ASTM D-2863	36 %

Electrical performance	Test Condition	Test Method	Test Result
Compared to the Leakage Traceability Index (CTI)	2.0mm	IEC 112	225 V

Physical properties	Test Condition	Test Method	Test Result
shrinkage rate		ASTM D-955	0.005-0.007 mm/mm

mechanical properties	Test Condition	Test Method	Test Result
tensile strength	断裂	ASTM D-638	59 Mpa
Impact strength of cantilever beam gap	总能量@23℃	ASTM D-1822	631 KJ/m
Rockwell hardness		ASTM D-785	59 M Scale
tensile strength	屈服	ASTM D-638	61 Mpa
flexural modulus		ASTM D-790	2330 Mpa
bending strength		ASTM D-790	98 Mpa
elongation	断裂	ASTM D-638	115 %
Impact strength of cantilever beam gap	23℃	ASTM D-256	未破裂
Tensile modulus		ASTM D-638	2380 Mpa
Impact strength of cantilever beam gap	23℃	ASTM D-256	694 J/m

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top