Material Properties:Easy to form｜Easy to demould
Application Areas:Plastic bag｜Electrical appliances｜Electronic and Electrical Applications
Color:--
Grade:Injection grade

Technical Data Sheet Compare

thermal performance	Test Condition	Test Method	Test Result
Heat Deflection Temperature	1.8 MPa, 未退火, 3.20 mm	ASTM D648	128 °C

Impact resistance	Test Condition	Test Method	Test Result
Suspended wall beam without notch impact strength	23°C	ASTM D4812	无断裂

Physical properties	Test Condition	Test Method	Test Result
shrinkage rate	流动 : 24小时	ASTM D955	0.70 - 0.90 %
shrinkage rate	shrinkage rate	横向流动 : 24小时	ASTM D955	0.70 - 0.90 %

injection	Test Condition	Test Method	Test Result
drying temperature			120 °C
drying time			4.0 hr
Suggested maximum moisture content			0.020 %
Temperature at the rear of the barrel			295 to 305 °C
Temperature in the middle of the barrel			305 to 315 °C
Temperature at the front of the material cylinder			310 to 320 °C
Processing (melt) temperature			300 to 315 °C
mold temperature			80 to 110 °C
Back pressure			0.200 to 0.300 Mpa
screw speed			30 to 60 rpm

mechanical properties	Test Condition	Test Method	Test Result
tensile strength	断裂	ASTM D638	53.0 Mpa
elongation	断裂	ASTM D638	53 %
flexural modulus		ASTM D790	2270 Mpa
bending strength		ASTM D790	81.0 Mpa
coefficient of friction	Dynamic	ASTM D3702	0.28
coefficient of friction	coefficient of friction	Static	ASTM D3702	0.17
Wear factor		ASTM D3702	2.0E+7 10^-8 mm³/N·m

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top